LumberJocks

All Replies on Delta 18-36 Drum Sander Accessories?

  • Advertise with us
View SawdustTX's profile

Delta 18-36 Drum Sander Accessories?

by SawdustTX
posted 09-03-2016 02:32 AM


10 replies so far

View Fred Hargis's profile

Fred Hargis

5552 posts in 2889 days


#1 posted 09-03-2016 01:12 PM

I didn’t buy any of the extras for mine, though I must admit I gave the extension tables some thought. But in use I found I only need them for the most heavy and awkward pieces, and I was able to use mu roller stands for those few times. I had no interest in the outfeed drum sander, but maybe that was because I has a belt disc combo at the time. I know having that outfeed sander on (for me) would have been a headache since I rolled mine back against the wall most of the time. There was apparently 2 models of the 31-250 made: those that had problems (the more common ones) and those that didn’t. Lucky for me, mine was a good one and served me well for a lot years.

-- Our village hasn't lost it's idiot, he was elected to congress.

View SawdustTX's profile

SawdustTX

305 posts in 2720 days


#2 posted 09-03-2016 08:41 PM

Thanks Fred, hoping I have the good one too. Ran great when I tested it, but that was without feeding anything through it. Should have a better idea Monday when I get to put some lumber through it.

View AandCstyle's profile

AandCstyle

3211 posts in 2653 days


#3 posted 09-03-2016 09:00 PM

Sawdust, I have the extension tables but have never used them. I’m willing to mail them to TX if you want to pay for shipping. They measure about 18”x20”x4” complete, but I could remove the MDF tables and just send the support arms. I bought the machine used and got a good (not great) one. PM me if you have any interest.

-- Art

View SawdustTX's profile

SawdustTX

305 posts in 2720 days


#4 posted 09-03-2016 10:42 PM

Art – that is incredibly generous! What a guy. I’ve PM’d you.

View Fred Hargis's profile

Fred Hargis

5552 posts in 2889 days


#5 posted 09-04-2016 12:40 PM

That is so cool! Way to go, Art.

-- Our village hasn't lost it's idiot, he was elected to congress.

View Roger's profile

Roger

21006 posts in 3200 days


#6 posted 09-13-2016 11:27 AM

Sounds and looks like a good haul. I think all drum sanders can be finicky.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View SawdustTX's profile

SawdustTX

305 posts in 2720 days


#7 posted 09-13-2016 01:19 PM

Roger – getting this one tuned up is proving you correct. Current status is I’ve now got a total of $296, and probably 2 hours of labor invested.

Still hunting for the external arbor and dust collector tray.

The sander hadn’t been used in years so the conveyor belt was stiff and brittle. It snapped in transit home. New conveyor belt $46.

The height adjustment mechanism would only move about 1/2”. Pulled the sanding table and motor, cleaned a ton of sawdust buildup out of the gears, threads, belt, bearings, etc. Apparently it had been used extensively without a dust collector. It was kind of fun seeing the stratified layers of sawdust telling the story of the different woods the previous owner had used.

With everything cleaned and lubed, it now works through the full height range, but to me it still takes too much force on the handwheel to adjust, like something is binding. Working that now. I think I’m going to go through the full initial assembly height adjustment alignment called out in the manual.

View MrMongo's profile

MrMongo

3 posts in 1072 days


#8 posted 09-13-2016 03:58 PM

I’ve had the 18-36 for several years, and have been happy with the tool. It took me a while to get the machine “tuned”, but once done, it has stayed parallel. If the original owner did not use dust control, then you will have to check it out thoroughly. This thing produces a LOT of sawdust, and if they didn’t use dust control, it will get jammed in between the work, rollers, and drum and cause them to get out of alignment.
I have the Long Arbor and 3” and 4” pneumatic sanding drums, but I use them on my Delta Disk/Belt sander. I have never used them on the 18/36, but it is the same accessory, so I would expect it to act the same. Overall they have been very useful for sanding irregular shaped items.

-- Steve, Plainfield, IL

View SawdustTX's profile

SawdustTX

305 posts in 2720 days


#9 posted 09-13-2016 04:25 PM

Appreciate the encouragement Steve! Looking forward to getting this thing humming along and making stuff smooth.

I spent over an hour with a shop vac, various brushes, compressed air, and rags getting all the built up dust out of and off of everything. I think I got at least a half gallon of dust out of the center of the hollow drum. Amazing. Hope the original owner wore a dust mask, clearly he never used dust collection.

Still hoping to find the long arbor and pneumatic drums. Delta and any suppliers no longer stock them, but I’ll go check if they are the exact same parts for the Disk/Belt sander and still available.

View Dviolante's profile

Dviolante

1 post in 868 days


#10 posted 02-08-2017 07:40 PM

Greetings All,
Im new to the board. Stumbled across this forum while searching for a set of In/Out feed tables for the Delta 255X Drum Sander (Part #50-389) Has anyone found a source for these? I just aquired a like new sander and aligned it ground up. Very happy with it so far but can see feed tables are in order. If anyone has a set of brackets they could trace, I could probably make a set pretty easily. Any help would be greatly appreciated.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com