LumberJocks

All Replies on Aluminum or Cast Iron wheels on a Band Saw?

  • Advertise with us
View BobinSachse's profile

Aluminum or Cast Iron wheels on a Band Saw?

by BobinSachse
posted 08-29-2016 08:27 PM


5 replies so far

View Woodknack's profile

Woodknack

12928 posts in 2922 days


#1 posted 08-29-2016 08:38 PM

Define “better”. What does it mean to you?

The physics of it are pretty obvious but cast iron will have more mass and require more energy to come up to speed but will store more energy; aluminum will be the opposite.

-- Rick M, http://thewoodknack.blogspot.com/

View JayT's profile

JayT

6314 posts in 2753 days


#2 posted 08-29-2016 08:57 PM

I prefer cast iron for the reason Rick mentions—more energy storage converts to less bog down when cutting. You generally find cast iron on the better saws and aluminum on entry level and benchtop saws. That definitely says something.

-- https://www.jtplaneworks.com - In theory, there is no difference between theory and practice. In practice, there is.

View MrUnix's profile (online now)

MrUnix

7505 posts in 2741 days


#3 posted 08-29-2016 09:03 PM

I’ve used both… couldn’t tell a difference other than a bit longer to spin down.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View splintergroup's profile

splintergroup

3009 posts in 1765 days


#4 posted 08-29-2016 09:28 PM

It’s all about mass. Aluminum is cheaper and entry level saws with low HP need the low mass to accelerate up to speed. Bigger saws use the inertia in the wheels for smoother cuts. Of course all this is more important for cuts that limit the saw (i.e. resawing). For light duty cutting, the economic saw/material choice will be plenty fine.

View BobinSachse's profile

BobinSachse

45 posts in 1993 days


#5 posted 08-30-2016 02:31 AM

Thanks all!! Looks lie Cast Iron wheels will be the way i will go.

We just bought a house o property that has a 30×30 shop. I sold almost all my tools when we downsized and now i will be rebuilding my tool inventory. going to be getting a Band saw, table saw and a lathe first then adding to that collection. I still have my drill press, scroll sat, planer and almost all my hand tools. Oh yeah, i still have my Jet DC too.

-- Bob Y.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com