All Replies on help me please

  • Advertise with us
View GR8HUNTER's profile

help me please

posted 08-15-2016 07:23 PM

4 replies so far

View jdh122's profile


1104 posts in 3382 days

#1 posted 08-15-2016 07:29 PM

A simple way is to use cleats made from 2×4 and plywood that attach to the studs (assuming your wall is not sheathed on the inside). They’re easy to build and rock solid. I copied mine from the wood whisperer, although I doubt that he was the first one to come up with the design:

-- Jeremy, in the Acadian forests

View ralbuck's profile


6248 posts in 2830 days

#2 posted 08-15-2016 07:31 PM

Make about 4—-6/8 foot tall large 2 by 4 T’s Keep adding cross bars. Then leave room for about 2 feet above the Bench area. Put a top(door???) across that and Containers that are easily moved under it!

Hope this gives you some good inspiration. I raid a fence companies dumpster and acquire a lot of very usable materials of all kinds. They are happy t get rid of it; as otherwise it would cost them disposal fees.

That helps me a lot to keep costs way down!

-- Wood rescue is good for the environment and me! just rjR

View lew's profile


12901 posts in 4319 days

#3 posted 08-15-2016 08:55 PM

I built this for the basement shop

It is made completely from 2×4 material. the long pieces tie into the floor (ceiling) joist above. The spacing between the “shelf” pieces is optional. The shelf pieces and the spacers between are all cut with a 5° angles on each end so the shelves tip up slightly. The shelf pieces just slide into the “hole” between the spacers. Mine sets against the wall. I have about 5 of these uprights spaced out over about 10’.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View SuperCubber's profile


1080 posts in 2848 days

#4 posted 08-15-2016 09:52 PM

I used Jay Bates’ idea, which is 2×4s and electrical metal tubing (EMT). Easy, strong and cheap!

-- Joe | Spartanburg, SC | "To give anything less than your best is to sacrafice the gift." - Steve Prefontaine

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics