LumberJocks

All Replies on Shou Sugi Ban Help

  • Advertise with us
View TNNovice's profile

Shou Sugi Ban Help

by TNNovice
posted 08-15-2016 05:37 PM


7 replies so far

View Mark Kornell's profile

Mark Kornell

1170 posts in 2924 days


#1 posted 08-16-2016 05:31 AM

You need to brush off the char – use a brass wire brush. There is no way to seal the char to the wood. Unfortunately you’ll loose most, if not all, of the alligatoring. After brushing off, also wipe off the remaining soot. Then oil.

Wear a mask!

-- Mark Kornell, Kornell Wood Design

View Kelly's profile

Kelly

2292 posts in 3338 days


#2 posted 08-16-2016 06:56 AM

The whole idea is to leave the char as a shield to the weather, Mark.

TNN, I DON’T KNOW that they bother sealing the char. I’ve dug up hundred year old charcoal bottle hunting and it was doing just fine without any protective finish.

View SuperCubber's profile

SuperCubber

1078 posts in 2678 days


#3 posted 08-18-2016 05:41 PM

I’m not in a place right now where I can re-watch this video again, but IIRC, Matt did a nice job describing the process:

http://m.youtube.com/watch?v=FPhyfP-qMM4

-- Joe | Spartanburg, SC | "To give anything less than your best is to sacrafice the gift." - Steve Prefontaine

View TNNovice's profile

TNNovice

2 posts in 1043 days


#4 posted 08-25-2016 12:53 PM

Kelly, I was assuming the sealer was to limit the smell of burnt wood in the house and to potentially protect against ash flaking off all over there place.

View TObenhuber's profile

TObenhuber

178 posts in 1986 days


#5 posted 01-02-2017 03:51 PM

Did you end up trying the Shou Sugi Ban? I’m interested in trying it on done plaques I make.

-- Travis, Virginia, www.facebook.com/CreativeWoodworksHybla

View RussellAP's profile

RussellAP

3105 posts in 2680 days


#6 posted 04-21-2017 12:13 AM

The char does help with weathering, but most of the weathering is done microscopically with tiny bits of char. Believe me, you won’t wash out all the char with brushes. I use a wire brush and a stiff nylon brush and there is still plenty of char down in the pours. When you give it a really wet coat of Tung oil it stiffens it up and it’ll last a good 20 years without much change in appearance. I just did an Adirondack today using the method, and I have 5 love seats up next for a customer. I think it’s a hell of a lot easier than stain and seal.

-- A positive attitude will take you much further than positive thinking ever will.

View r33tc0w's profile

r33tc0w

174 posts in 878 days


#7 posted 04-21-2017 12:33 AM

Our sign shop did this for a sign not too long ago. Get spray poly or automotive clear coat. It’ll help keep the char bonded together without physically applying a coating. Plan on caking it on big-time, need a lot to hold it on

-- Matthew 13:53-58

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com