LumberJocks

All Replies on Rigid 10" R4512 Table Saw dust collection chute

  • Advertise with us
View William64's profile

Rigid 10" R4512 Table Saw dust collection chute

by William64
posted 08-11-2016 12:59 PM


4 replies so far

View mramseyISU's profile

mramseyISU

578 posts in 2055 days


#1 posted 08-11-2016 01:17 PM

You need a rubber boot to connect the two 4” sections. You can get a rubber 4” plumbing coupler that works for this. It’s tight but you can soap up the rubber and get slid on. That’s what I had to do on mine anyway.

-- Trust me I'm an engineer.

View WhyMe's profile

WhyMe

1177 posts in 2071 days


#2 posted 08-11-2016 01:59 PM

You need this coupler http://www.rockler.com/dust-coupling

View Albert's profile

Albert

532 posts in 4099 days


#3 posted 08-11-2016 02:40 PM

I made one from plywood, shape it like a doughnut with the proper dimensions and hold it in place with a couple of wood screws and / or duct tape.

View mramseyISU's profile

mramseyISU

578 posts in 2055 days


#4 posted 08-11-2016 06:45 PM

Here’s the one I picked up at Home Depot. List price is a little more than the one at Rockler but if you have to order it from Rockler you’ll make of the difference in shipping costs.

http://www.homedepot.com/p/4-in-x-4-in-PVC-DWV-Mechanical-Flexible-Coupling-P1056-44/100372298

-- Trust me I'm an engineer.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com