LumberJocks

All Replies on Tool Gloat- Big Jointer

  • Advertise with us
View ErikF's profile

Tool Gloat- Big Jointer

by ErikF
posted 08-09-2016 11:12 AM


17 replies so far

View ste6168's profile

ste6168

259 posts in 1739 days


#1 posted 08-09-2016 11:52 AM

Saw the post on Instagram last night. Thing hums! Nice tool.

View dhazelton's profile

dhazelton

2839 posts in 2864 days


#2 posted 08-09-2016 12:05 PM

Dayum! Need a porkchop now.

View waho6o9's profile (online now)

waho6o9

8804 posts in 3144 days


#3 posted 08-09-2016 12:06 PM

Congrats!

View chrisstef's profile

chrisstef

17988 posts in 3574 days


#4 posted 08-09-2016 12:15 PM

There’s my battleship!

-- Its not a crack, its a casting imperfection.

View TheGreatJon's profile

TheGreatJon

348 posts in 1801 days


#5 posted 08-09-2016 12:24 PM

Nice!! That’s a heck of a machine. And it sounds like it’s running perfectly. Did you have to do anything to the bearings or motor, or was it ready to rock when it arrived?

-- This is not the signature line you are looking for.

View bonesbr549's profile

bonesbr549

1584 posts in 3635 days


#6 posted 08-09-2016 12:39 PM

Love those oldies! Good find.

-- Sooner or later Liberals run out of other people's money.

View ErikF's profile

ErikF

649 posts in 2811 days


#7 posted 08-09-2016 12:43 PM



Nice!! That s a heck of a machine. And it sounds like it s running perfectly. Did you have to do anything to the bearings or motor, or was it ready to rock when it arrived?

- TheGreatJon

Just had to clean many years of dirt and grime off the table and change the motor wiring from 440 to 220. Bearings are amazing- it takes 3 minutes for the head to stop once I cut off power. Would like a brake.

-- Power to the people.

View Don W's profile

Don W

19387 posts in 3135 days


#8 posted 08-09-2016 01:00 PM

Sweet!!

-- http://timetestedtools.net - Collecting is an investment in the past, and the future.

View JoeinGa's profile

JoeinGa

7741 posts in 2574 days


#9 posted 08-09-2016 03:20 PM

Dang. That thing is a beast. Nice score !

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View HerbC's profile

HerbC

1801 posts in 3427 days


#10 posted 08-09-2016 03:57 PM


Nice!! That s a heck of a machine. And it sounds like it s running perfectly. Did you have to do anything to the bearings or motor, or was it ready to rock when it arrived?

- TheGreatJon

Just had to clean many years of dirt and grime off the table and change the motor wiring from 440 to 220. Bearings are amazing- it takes 3 minutes for the head to stop once I cut off power. Would like a brake.

- ErikF

I think some three phase motor controllers provide braking capabilities…

Herb

-- Herb, Florida - Here's why I close most messages with "Be Careful!" http://lumberjocks.com/HerbC/blog/17090

View Jerry's profile

Jerry

3284 posts in 2216 days


#11 posted 08-10-2016 05:31 AM

Wow, that is a beauty. I traded for a brand new 10 horse motor from Craigslist before I knew about 3 phase. I only invested 200 bucks for the motor, then I found out I’d have to spend a thousand for a converter. Maybe you have a cheaper way? Anyway, watched the video, that is one sweet machine! Congrats on that.

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View Loren's profile

Loren

10477 posts in 4215 days


#12 posted 08-10-2016 06:09 AM

I think I have $125 into my 10hp converter for
the motor, about $200 for a panel off ebay and
another $80 or so for wires and plugs.

It will run 5hp 3 phase no problem and more with
coaxing a machine on startup.

View robscastle's profile

robscastle

6580 posts in 2772 days


#13 posted 08-10-2016 07:38 AM

Nice find
runs perfectly
Whats this rotary phase converter gadget plase?

Oh almost forgot the usual Gloat reply of two words applys !!.

-- Regards Rob

View ErikF's profile

ErikF

649 posts in 2811 days


#14 posted 08-10-2016 08:58 AM



Nice find
runs perfectly
Whats this rotary phase converter gadget plase?

Oh almost forgot the usual Gloat reply of two words applys !!.

- robscastle

Rotary phase converters are very handy pieces of gear for the shop and a cheap way to get 3 phase power. A Google search will give a better explanation but it’s a 3 phase motor, a way to start the motor (I use capacitors and a switch but there are easier/cheaper ways), and a connection from the motor to the equipment you want to run. Once the converter motor starts spinning it “makes” the three phase power. Again- a better explanation can be found on Google.

They can be made on the cheap if you’re resourceful. I watch local auctions and have purchased a few 3 phase electric motors for $1 per horse power. If you want to go much bigger than 7.5hp it’s good to have a cherry picker to move it around your shop. I have a 40hp electric motor that weighs 550lbs.

They can be sized to run 1hp to 100hp, just depends on the equipment you’re running. I run a 25hp converter for my shop and it has no issue powering any machines.

It opens up the door to professional equipment and better power.

If I had just one or two pieces of 3 phase equipment I would run them off a VFD since they’re a quick install and require very little wiring.

-- Power to the people.

View Fred Hargis's profile

Fred Hargis

5844 posts in 3061 days


#15 posted 08-10-2016 01:37 PM

YOU SUCK!

-- Our village hasn't lost it's idiot, he was elected to congress.

View nailbanger2's profile

nailbanger2

1041 posts in 3711 days


#16 posted 08-10-2016 01:48 PM

Those are the two words previously referenced.

-- Wish I were Norm's Nephew

View bigblockyeti's profile (online now)

bigblockyeti

6149 posts in 2288 days


#17 posted 08-10-2016 01:49 PM

$160 for that 20” jointer is way, way beyond a simple gloat, heck that’s probably less than scrap prices for something that heavy!

-- "Lack of effort will result in failure with amazing predictability" - Me

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com