All Replies on New Live Edge Slab Bench

  • Advertise with us
View docspencer's profile

New Live Edge Slab Bench

by docspencer
posted 08-06-2016 02:33 PM

6 replies so far

View dalepage's profile


387 posts in 1724 days

#1 posted 08-06-2016 08:35 PM

I’d put a bow tie dutchman, maybe even two or three, to stop the crack. It’s a great look, too.

-- Dale

View DirtyMike's profile


637 posts in 1785 days

#2 posted 08-07-2016 07:09 AM

in your bottoms picture, make the left side the front part of the bench. dutchmans for the win.

View Tennessee's profile


2901 posts in 3398 days

#3 posted 08-07-2016 12:15 PM

Bowties for sure to stop the crack.

On which side should be up, I think people tend to think that folks who will use it will always want the side edge visible, so your second picture.

But here is my humble opinion.
I believe that on raw edged tables, often the slant of the slab edge lends itself much better to have the larger side up. Two reasons – The table is a bit bigger on top, and second, to me it looks more proportional with the sides slanting in towards the bottom.
This is reversed when you have a table with raw edged wood and two pieces, with a piece of glass in the middle on the edges, but for a whole piece like you have, I like the edges to be slanted in and not show so much.

-- Tsunami Guitars and Custom Woodworking, Cleveland, TN

View dalepage's profile


387 posts in 1724 days

#4 posted 04-22-2017 03:03 AM

I do not believe putting a slab end on the bench will stop the crack. Stop it right now and save yourself some wasted time and a longer crack.

-- Dale

View JayCee123's profile


200 posts in 1648 days

#5 posted 04-22-2017 11:54 AM

IMHO attaching your planned slab legs (probably with the grain of the wood running vertically) is not going to stop this split from growing. In fact the seat slab could actually split the attached leg apart. The above posters offer the best advice use multiple butterflies.

View tschmidty68's profile


16 posts in 1295 days

#6 posted 04-24-2017 04:47 AM

I agree with using bowties. Check out the post I just submitted under the same forum topic. I used bowties to stop a crack in a piece of dark walnut, 3 on top, and a larger one on the bottom just for more stabilization.

-- Haven't lost a finger....yet...

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics