LumberJocks

All Replies on Grizzly G0458 Drum Sander Question

  • Advertise with us
View MT_Stringer's profile

Grizzly G0458 Drum Sander Question

by MT_Stringer
posted 08-05-2016 01:17 AM


6 replies so far

View firefighterontheside's profile

firefighterontheside

20276 posts in 2241 days


#1 posted 08-05-2016 01:50 AM

I have a 458 and when I bought it used it was just like yours. Also the clamp pieces at both ends were broken. I had to totally dismantle it. You will have to take out the bearing, but that’s not terrible to do. Call to order the part and they will help explain what you need to do. I called many times and they talked me thru the process. Very helpful.

-- Bill M. "People change, walnut doesn't" by Gene.

View MT_Stringer's profile

MT_Stringer

3183 posts in 3615 days


#2 posted 08-05-2016 02:06 AM

Thanks Bill.
I called yesterday and the tech was helpful. He asked about the spring and I had to go investigate. At least I will know more when I call back.

I am having a tough time getting my snap ring pliers on the snap ring that holds the bearing in place. UGH.

Onward and upward.
Mike

-- Handcrafted by Mike Henderson - Channelview, Texas

View firefighterontheside's profile

firefighterontheside

20276 posts in 2241 days


#3 posted 08-05-2016 02:53 AM

Mike, does yours have the spring retainer on the fixed pan(185)? I had to replace that part on both ends of my drum. The originals did not have the retainer, which I think lead to the spring problem in the first place.

I had the same snap ring problems. My pliers are missing the set screws that hold the tips in.

-- Bill M. "People change, walnut doesn't" by Gene.

View MT_Stringer's profile

MT_Stringer

3183 posts in 3615 days


#4 posted 08-05-2016 03:07 AM



Mike, does yours have the spring retainer on the fixed pan(185)? I had to replace that part on both ends of my drum. The originals did not have the retainer, which I think lead to the spring problem in the first place.

I had the same snap ring problems. My pliers are missing the set screws that hold the tips in.

- firefighterontheside

Yes it is a flat plate held in place with a cap screw.

-- Handcrafted by Mike Henderson - Channelview, Texas

View firefighterontheside's profile

firefighterontheside

20276 posts in 2241 days


#5 posted 08-05-2016 04:06 AM

Ah, well I guess even with the retainer the spring can still go bad.

-- Bill M. "People change, walnut doesn't" by Gene.

View MT_Stringer's profile

MT_Stringer

3183 posts in 3615 days


#6 posted 08-05-2016 03:42 PM



Ah, well I guess even with the retainer the spring can still go bad.

- firefighterontheside

It is shaped like a banana. :-(
Headed out on a busy day. I guess I will wait until Monday to call and order it.

Thanks for the help. I appreciate it.
Mike

-- Handcrafted by Mike Henderson - Channelview, Texas

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com