All Replies on Hardening Wood Guitar Picks

  • Advertise with us
View TheSkreepyTinker's profile

Hardening Wood Guitar Picks

by TheSkreepyTinker
posted 08-04-2016 09:18 PM

6 replies so far

View bobasaurus's profile


3684 posts in 4070 days

#1 posted 08-04-2016 10:07 PM

I’ve made picks by gluing up two pieces of wood for extra strength. If you alternate the grain directions, you can get really strong thin pieces. And even two-tone if you like. Kind of like making your own tiny plywood with nice wood species.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View lennyk's profile


34 posts in 1718 days

#2 posted 08-08-2016 10:38 AM

i doubt poly would work well, seen it peel of in so many applications so it doesn’t appear to soak in deep.

The CA glue is a good option to try, it is used extensively in building model airplanes.
the thin variety will definitely soak in deep,
however it cures very fast and may cure rough as it is a chemical reaction,
make sure there is no dust on the surface.

If you get a bottle which is going bad, it will take longer to cure and have more time to soak in.

View Gene Howe's profile

Gene Howe

12258 posts in 4315 days

#3 posted 08-08-2016 12:46 PM

Contact Stew-Mac. I’d bet they’d have some suggestions.
Allen’s idea is a good one, too. Maybe plys AND CA glue.
I’d like to see what you settle on. Please let us know.

-- Gene 'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton

View TheSkreepyTinker's profile


2 posts in 1772 days

#4 posted 08-09-2016 09:15 PM

Thanks for the replies! I picked up some Titebond Thin yesterday from Woodcraft. I applied 3 coats to an ebony pick, and it turned out beautifully! The pick was already super strong, but now it’s waterproof and really shines after the 12,000 micro-mesh. I had an issue with zebrawood breaking easily with a little pressure, but I can’t even bend it after 4 coats of CA glue.

I’ll attach some pictures when I get some good ones.

@bobasaurus, I drew up some laminated designs a couple weeks ago that would make really cool patterns with different woods. I’ll post some pictures when they’re finished.

View devann's profile


2250 posts in 3579 days

#5 posted 08-09-2016 09:29 PM

If you continually rub in some boiled linseed oil you’ll replace the moisture with oil keeping out future moisture while making the wood harder. Or after drying the picks I would probably just soak ‘em till the were full of oil. The wood has to be pretty dry first, remember oil & water don’t mix.

-- Darrell, making more sawdust than I know what to do with

View Woodknack's profile


13504 posts in 3267 days

#6 posted 08-10-2016 05:10 AM

You might experiment with thinned white glue (glue size). It’s sometimes used to make veneer stronger and more pliable.

-- Rick M,

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics