LumberJocks

All Replies on Which Veritas Dovetail Saw?

  • Advertise with us
View AandCstyle's profile

Which Veritas Dovetail Saw?

by AandCstyle
posted 07-31-2016 03:25 PM


16 replies so far

View Richard H's profile

Richard H

490 posts in 2194 days


#1 posted 07-31-2016 03:36 PM

Both links end up going to the same page.

I use the Veritas 14tpi dovetail saw a fair amount and really like it though I think a 12tpi tenon saw would work just as well in most woods. I have a Japanese spine backed saw for really fine cuts as my eyes are barely good enough to sharpen a 14tpi saw much less something finer so I prefer disposable blades for the really fine saws.

I don’t own one but I have read really good things about the Badaxe hybrid saws. If I was doing it again I think I would get the Badaxe 12” small dovetail/tenon saw instead of 2 Veritas saws and see if I could get by with just one backsaw on my bench.

View Fred Hargis's profile

Fred Hargis

5760 posts in 3007 days


#2 posted 07-31-2016 05:25 PM

It didn’t didn’t look like the same page to me, not exactly. As Art said, it seemed the same except the prices on one page was $20 higher. Art, it seems to me this has come up before on another forum, and one of those may be the Canadian price, as opposed to the other which may be in US dollars.

-- Our village hasn't lost it's idiot, he was elected to congress.

View JayT's profile

JayT

6296 posts in 2724 days


#3 posted 07-31-2016 05:33 PM

Same page for different countries. The first is the US page, the second is the Canadian site. Check out the flag in the upper right corner to know which you are on for sure.

-- https://www.jtplaneworks.com - In theory, there is no difference between theory and practice. In practice, there is.

View Kirk650's profile

Kirk650

672 posts in 1262 days


#4 posted 07-31-2016 06:38 PM

Though I’m not the best dovetail guy around (or the top 50%), I have decided that I prefer pull-cut dovetail saws. Seems easier to me to make accurate cuts.

View bondogaposis's profile

bondogaposis

5542 posts in 2864 days


#5 posted 07-31-2016 06:53 PM

I have the 20 TPI dovetail saw and it works great I have used it on 3/4” stock and I have no complaints. One advantage of a finer tooth saw is they are easier starting. The disadvantage is that there are more teeth to sharpen.

-- Bondo Gaposis

View Bill White's profile

Bill White

5228 posts in 4474 days


#6 posted 07-31-2016 07:17 PM

I’ve just bought an 8” DT “Bay State” (read that Simonds) from Aiden 1211. Price/value is a big issue in my shop, so I choose to buy old vs: new.
Will let ya know how the saw works. Robert has cleaned the plate, jointed, sharpened (14 tpi), set, and refined the tote for less money than a new saw with no provenance.
Saw has a cast steel spine, but that matches the other tenon saw that I have, and will be a “partner” to my Bay State full sized cross cut saw with the nib.
NO! You can’t have ‘em. They’re mine!
Disclaimer:
PLEASE do not read this post as a “shill” poster. Robert is a quality seller, and fully discloses his sale items. I am a customer.
Bill

-- [email protected]

View TheFridge's profile

TheFridge

10859 posts in 1999 days


#7 posted 07-31-2016 08:44 PM

I can vouch for Robert as well. Good dude.

Back to topic. I’d say the 14 tpi saw.

Edit: I have the LN myself and love it.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View AlaskaGuy's profile

AlaskaGuy

5356 posts in 2822 days


#8 posted 07-31-2016 09:19 PM

Just in case you don’t know the founder of Lee Valley recently died.

https://www.thestar.com/business/2016/07/16/leonard-lee-founder-of-lee-valley-tools-was-the-ultimate-craftsman.html

-- Alaskan's for Global warming!

View Robert's profile

Robert

3541 posts in 1994 days


#9 posted 07-31-2016 10:46 PM

There’s no $69 saw.

I have the 3 saw set and like them alot.
Questioned at first whether I needed both 14 and 20. I use both.

If you can only get one, I would go with the 20.

-- Everything is a prototype thats why its one of a kind!!

View AandCstyle's profile

AandCstyle

3219 posts in 2770 days


#10 posted 07-31-2016 10:48 PM

Fred & Jay, thanks for clearing up my confusion. I’m really glad I didn’t order the $89 saw. :D

Bondo, I like easier starting so will go with the 20 TPI blade. Thank you for the tip.

Bill, you got me all excited about your saw, but then told me I couldn’t have yours. :/ Anyhow, I don’t know enough to purchase a saw from Robert.

Alaska, I had seen that. He left a great legacy for his family, workers and the woodworking community in general. His son, Rob, is an outstanding person as well.

I will wait until LV offers free shipping for orders >$40 to place my order. Will I get by with just the one saw or should I order the pair for $120?

-- Art

View JADobson's profile

JADobson

1446 posts in 2624 days


#11 posted 08-01-2016 01:40 AM

Just to clear up the price thing… you are linking to the same page just one is to the Canadian site and the other link goes to the American site. The $89 price is what we pay up here in Canuckistan (Which interestingly is a few cents cheaper than the American price).

-- No craft is very far from the line beyond which is magic. -- Lord Dunsany — Instagram @grailwoodworks

View Andre's profile

Andre

2806 posts in 2319 days


#12 posted 08-01-2016 02:54 AM

I have the 20tpi and find it works okay, that said I use a Zona 28 tpi and or Japanese pull saw for for most cuts under a 1/2”. Picked up a Gramercy 14 tpi a while back and have not had a real chance to test it properly but with the few test cuts can say without a doubt it feels and cuts WAY nicer! If only it wasn’t so darn pretty. IMHO!

-- Lifting one end of the plank.

View AandCstyle's profile

AandCstyle

3219 posts in 2770 days


#13 posted 08-01-2016 09:40 PM

James, it is only right that the saws should be a bit cheaper in Canada since they are Canadian made by a great Canadian company.

Andre, Gramercy is way out of my price range, but if you want to get rid of your 20tpi Veritas, let me know. haha

-- Art

View waho6o9's profile

waho6o9

8771 posts in 3090 days


#14 posted 08-02-2016 02:30 PM

View Aidan1211's profile

Aidan1211

198 posts in 1339 days


#15 posted 08-03-2016 04:34 AM

I’ll second the Lie Nielsen the weight balance and longevity of the steel are top notch. I prefer the older saws for the most part but my Lie Nielsen is as good as my older DT’s. I’d also advise going with the finer toothed saw but the 14 will give a nice cut (depending on the amount of set in the teeth) and is a little more versatile. If you want the best of both worlds it’s best to get both saws each has its own use in certain situations. Makers of yesterday didn’t own just one saw for a reason. Good luck on your hunt do as much research as you can before you buy.

Robert

-- its better to plan on the task at hand than actually doing it........ You look smarter.

View AandCstyle's profile

AandCstyle

3219 posts in 2770 days


#16 posted 08-03-2016 11:27 PM

Waho & Aidan, I think I have pretty much decided on the LV as soon as they offer free shipping. Thanks for the suggestions.

-- Art

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com