LumberJocks

All Replies on Craftsman 113 Table Saw - Need new motor

  • Advertise with us
View Ardubya's profile

Craftsman 113 Table Saw - Need new motor

by Ardubya
posted 07-26-2016 07:43 PM


10 replies so far

View WhyMe's profile

WhyMe

1153 posts in 1954 days


#1 posted 07-26-2016 08:06 PM

Get a motor of the same HP and RPMs and shaft size and frame. I know, easy for me to say. Have you checked the capacitor?

View Chas7715's profile

Chas7715

40 posts in 1279 days


#2 posted 07-26-2016 08:10 PM

I haven’t replaced the motor on my series 113 table saw but I did have to replace a motor on my Porter Cable band saw. Check out Grizzly. They have a crap ton of motor options.

-- Perfection is highly overrated!

View TMGStudioFurniture's profile

TMGStudioFurniture

55 posts in 1212 days


#3 posted 07-26-2016 08:11 PM

Have you checked to make sure the capacitor on your motor is good? That could be an easy fix – much easier than replacing the whole motor.

-- https://www.etsy.com/shop/TMGStudioFurniture

View Woodbum's profile

Woodbum

874 posts in 3458 days


#4 posted 07-26-2016 08:22 PM

My ‘86 Craftsman TS motor finally gave it up in ‘09. I bought an exact match for it from Grizzly when I bought my 1023 TS. I sold the Craftsman saw with the new motor and the guy that bought it was happy with it.

-- "Now I'm just another old guy wearing funny clothes"

View MadMark's profile

MadMark

979 posts in 1846 days


#5 posted 07-26-2016 08:36 PM

Frame sizes are standardized as NEMA numbers. All motors with the same frame # are identical mount even if RPM, voltage, etc. are different. Grizzly, mcmaster.com, Grainger etc will have compatible motors. This would be a great time to upgrade to 220vac.

M

-- Madmark - [email protected] Wiretreefarm.com

View MrUnix's profile

MrUnix

7388 posts in 2592 days


#6 posted 07-26-2016 09:56 PM

Unless you let the magic smoke out of the motor, it’s probably a simple and cheap fix – but more info is needed other than just “given up the ghost”. Since you have already written it off, you might as well see if you can fix it – certainly won’t hurt and you may be pleasantly surprised.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View WhyMe's profile

WhyMe

1153 posts in 1954 days


#7 posted 07-26-2016 11:32 PM



Frame sizes are standardized as NEMA numbers. All motors with the same frame # are identical mount even if RPM, voltage, etc. are different. Grizzly, mcmaster.com, Grainger etc will have compatible motors. This would be a great time to upgrade to 220vac.

M

- MadMark

And while you’re at it, upgrade to an 8 track tape player. 220V is no longer available. It’s now 240V. :)

View TheFridge's profile

TheFridge

10858 posts in 1879 days


#8 posted 07-26-2016 11:54 PM

Grainger is expensive

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View MikesProjects's profile

MikesProjects

172 posts in 2295 days


#9 posted 07-27-2016 08:19 AM

Grizzly G2535 1.5 hp Single-Phase Motor with 3450 RPM read the reviews here…
https://www.amazon.com/Grizzly-G2535-Single-Phase-Motor-3450/dp/B00DQJOZ94

more on this subject here at lumberjocks

http://lumberjocks.com/topics/69777

http://lumberjocks.com/topics/61057

http://lumberjocks.com/topics/40888

http://lumberjocks.com/topics/90298

-- -Mike, Southern California, YouTube User ( Give & Take )

View knotscott's profile

knotscott

8290 posts in 3769 days


#10 posted 07-27-2016 09:36 AM

Whoever told you they could handle up to 5hp is taking a wild guess, and adding risk. I suppose it depends on how you define the word “handle”. Even 3hp will push every limit of the saws support structure, pulleys, arbor, etc. They’d work for a while, but it would sure increase the chances of complications from the added weight and torque. Going with an original 1hp to 1.5hp is prudent. The most I’d consider is 2hp. Anything more will require 220v (aka 240v) supply.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com