All Replies on Craftsman Dado Set

  • Advertise with us
View torx's profile

Craftsman Dado Set

by torx
posted 07-25-2016 08:37 PM

5 replies so far

View syenefarmer's profile


557 posts in 3886 days

#1 posted 07-26-2016 08:26 PM

It appears to be a steel toothed dado set. While it may well work just fine now I doubt it will for long. Meaning, you will have to sharpen all those teeth on a very regular basis. I have no experience with a set like that so I’m mostly WAGing on its performance.

View MadMark's profile


979 posts in 2258 days

#2 posted 07-26-2016 08:43 PM

They work but they’re generally terrifying to use. The two tooth chippers tend to take huge scary chunks. They usually vibrate when not cutting, more so as you start to feed.

Modern sets have more teeth on the chippers reducing the risk of over-feeding kickback and for smoother dado bottoms.

Make a clock out of the outer blades.


-- Madmark - [email protected]

View Julian's profile


1591 posts in 3496 days

#3 posted 07-26-2016 09:15 PM

I purchased that same dado set many years ago for my first table saw. All steel teeth, that do not cut very cleanly. It will cause a lot of tear out especially on plywood and the bottom of the dado will be rough. The two toothed chipper is very common even on many good dado sets; not an issue. You can try some test cuts to see if it works to your liking. My opinion: get a good quality dado set; it will make a big difference.

-- Julian

View moke's profile


1574 posts in 3582 days

#4 posted 07-27-2016 04:55 PM

+1 from Julian…...IMHO it could not be said better. A friend that taught me a lot gave me one of the same sets. I used it a few times, and I did not want to seem ungrateful, but I should have given it back…..

-- Mike

View Rick  Dennington's profile

Rick Dennington

6956 posts in 4000 days

#5 posted 07-27-2016 06:17 PM

My very first set of dado blades was Delta. It’s a 6” set with 2 blades, and several chippers. It was/is hardened steel, and no carbide…I bought this set in 1989-90…That prolly was before carbide came out….I used it till the dado sets with cabide tips came out….I now have 2 sets of those…both 8”....I still have the Delta set….Still works.

-- " There's a better way.....find it"...... Thomas Edison.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics