LumberJocks

All Replies on Anyone ever see a radial arm drill press?

  • Advertise with us
View srzsrz's profile

Anyone ever see a radial arm drill press?

by srzsrz
posted 06-24-2014 05:11 AM


24 replies so far

View Loren's profile (online now)

Loren

11135 posts in 4698 days


#1 posted 06-24-2014 05:34 AM

Useful for making some chair styles I suppose, or some
product you develop.

For general use it may speed up rare angled setups,
but that’s about it.

As with all machinery it depends on the work you do.

... if the price is nice though…

well, I wouldn’t pass if it was $60 and in town. I don’t
need it but it might be fun.

View Peter Oxley's profile

Peter Oxley

1427 posts in 4925 days


#2 posted 06-24-2014 05:35 AM

You see these around from time to time. I’m not really sure how practical they are. Drill holes in an arc pattern … drill holes in a row away from the post … tilting head for angled holes …

-- http://www.peteroxley.com/woodworking -- http://north40studios.etsy.com --

View Loren's profile (online now)

Loren

11135 posts in 4698 days


#3 posted 06-24-2014 06:05 AM

I will say they can pull out and drill far from the column. This
can be helpful once in awhile. I work around such limitations
by using a hand drill .

It would be a cool tool for a range of weird things you
might want to build. I suppose some Windsor chairmakers
use them to make the subtle angles, but most probably
use a brace with a spoon bit.

View runswithscissors's profile

runswithscissors

3129 posts in 3075 days


#4 posted 06-24-2014 07:15 AM

I had the Rockwell version of that many decades ago. Like that one, it lacked a gear rack and cranked pinion for table elevation, which was really a PITA. You have to loosen the clamp, grasp the table with both hands, wiggle it back and forth to move it while lifting. Ugh. Not so bad going down, of course.

You can drill to the center of a very large circle, which is handy once in a while. They aren’t so good at drilling metal, as there is too much flex in the post and long arm.

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View EEngineer's profile

EEngineer

1137 posts in 4664 days


#5 posted 06-24-2014 11:00 AM

What I would really like about one of these is the increased capacity. There are many times I was just a couple inches short of what I needed to do. As long as it works as well as a standard drill press with the head close to the vertical column, I wouldn’t mind having one of these. Finding the extra space needed behind it, though, would be tough in my shop.

-- "Find out what you cannot do and then go do it!"

View Fred Hargis's profile

Fred Hargis

6917 posts in 3544 days


#6 posted 06-24-2014 11:26 AM

The increased capacity is what I see as the strength of these things, along with the ability to tilt for angled holes. I think they would be superior for woodworking if a high quality one was ever built.

-- Our village hasn't lost it's idiot, he was elected to congress.

View distrbd's profile

distrbd

2252 posts in 3497 days


#7 posted 06-24-2014 12:25 PM

If I had a choice between a regular/single column drill press or a radial type ,I would choose the regular ,unless the radial DP is designed for industrial use,I had a chance to buy an old radial DP but was told the further you drill from the main column ,the more the head would flex which would result in inaccurate holes.

-- Ken from Ontario, Canada

View Buckethead's profile

Buckethead

3196 posts in 2919 days


#8 posted 06-24-2014 12:40 PM

While attributed to Spiro Agnew, it was actually William Sapphire who coined the phrase “nattering nabobs of negativism”. May God have mercy on his soul.

Buy the danged thing! It’s awesome!

-- Support woodworking hand models. Buy me a sawstop.

View Nubsnstubs's profile

Nubsnstubs

1774 posts in 2780 days


#9 posted 06-24-2014 12:46 PM

I bought the Delta Rockwell version back in mid 78, and by the end of 78, I wished I hadn’t. I’m not one for having to square things before use. It took 3 years to finally decide I had enough of it and I ended up getting a drill press made in 1912, and it’s been great…..... Jerry (in Tucson)

-- Jerry (in Tucson) www.woodturnerstools.com

View dhazelton's profile

dhazelton

2839 posts in 3347 days


#10 posted 06-24-2014 12:48 PM

I guess a tilt head is the advantage over a tilt table. Drilling holes in a chair seat for splayed legs or whatever. I’d bolt it to a bench as it looks a bit top heavy.

View Ripthorn's profile

Ripthorn

1459 posts in 4035 days


#11 posted 06-24-2014 01:09 PM

These are fairly common in metalworking, much more so than in woodworking. They are great for times when you need to drill lots of angled holes or increased capacity. A well built one does not suffer from flex and actually works quite well.

-- Brian T. - Exact science is not an exact science

View distrbd's profile

distrbd

2252 posts in 3497 days


#12 posted 06-24-2014 01:51 PM

Yeah ,be positive ,”buy the danged thing”, it may not end up to be a door stopper .

-- Ken from Ontario, Canada

View bigblockyeti's profile

bigblockyeti

7188 posts in 2771 days


#13 posted 06-24-2014 01:59 PM

I’ve seen them used almost exclusively in metalworking and typically with much larger machines. That one is quite small relative to what I have experience with. We had one at work with a 12” vertical column and 8” round horizontal quill support. It really didn’t get used much after the 5 axis cnc.

-- "Lack of effort will result in failure with amazing predictability" - Me

View wiswood2's profile

wiswood2

1138 posts in 4746 days


#14 posted 06-24-2014 03:25 PM

I have a grizzly that is about 8 years old I use it all the time.
Chuck

-- Chuck, wiswood2 www.wisconsinwoodchuck.com

View gtbuzz's profile

gtbuzz

427 posts in 3492 days


#15 posted 06-24-2014 03:51 PM

View b2rtch's profile

b2rtch

4921 posts in 4099 days


#16 posted 06-24-2014 03:55 PM

They can be extremely convenient, Grizzly and other sale them

-- Bert

View joeyinsouthaustin's profile

joeyinsouthaustin

1294 posts in 3123 days


#17 posted 06-24-2014 04:39 PM

My brother used one to make this

.

-- Who is John Galt?

View lateralus819's profile

lateralus819

2243 posts in 2940 days


#18 posted 06-24-2014 10:40 PM

My inlaws have an older rockwell, mounted to a stamped frame. I do quite like it. While i don’t move the head in and out, some times it’s nice to be able to swivel the head side to side.

View runswithscissors's profile

runswithscissors

3129 posts in 3075 days


#19 posted 06-25-2014 12:58 AM

I used mine to make raised panels for my roll top desk. I used the Wagner Safety Planer (did I get that name right?) and tilted the head, then ran the panel along a fence to create the cove all around. Took several passes, of course. Worked well, but required a lot of sanding. Didn’t have any other choice at the time.

I do admire Grizzly’s floor standing model, as it has more robust components, and a crankable table elevation setup.Though I’m challenged for room in my shop, I may pull the trigger next time one comes up on CL. (happens once every 2 or 3 years).

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View carver1942's profile

carver1942

93 posts in 2755 days


#20 posted 06-25-2014 01:09 AM

About 20 years ago I own a Craftsman floor model radial drill press. I loved it. It was similar to the current Grizzly models. It was great for drilling the holes in chair seats for the leg, back, and arm spindles. The only reason I got rid of it was a divorce. If I were to get a floor drill press now, it would be a radial drill.
Ed

View bowedcurly's profile

bowedcurly

519 posts in 2779 days


#21 posted 06-25-2014 05:57 AM

If I was going to buy a drill press again I would go radial you have endless possibilities and a lot of capability for drilling lots of different angles and lenghts, heights

-- Staining killed the wood<<<<<>>>>>Dyeing gave it life

View MrRon's profile

MrRon

6005 posts in 4294 days


#22 posted 06-25-2014 05:31 PM

Here is a drill press, but a bit bigger.” http://www.mscdirect.com/product/details/92811736

View RogerM's profile

RogerM

807 posts in 3449 days


#23 posted 06-27-2014 02:02 PM

I have one just like the one in the photo which was made by Delta. Still in use and love it.

-- Roger M, Aiken, SC

View b2rtch's profile

b2rtch

4921 posts in 4099 days


#24 posted 06-27-2014 02:43 PM

There is a Rockwell on stand, on sale on my local classified for $120.00

-- Bert

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com