LumberJocks

All Replies on Dust Collector: Harbor Freight 2 Hp VS. Grizzley 1 Hp

  • Advertise with us
View Jim's profile

Dust Collector: Harbor Freight 2 Hp VS. Grizzley 1 Hp

by Jim
posted 03-27-2014 08:21 PM


19 replies so far

View Jim's profile

Jim

119 posts in 2438 days


#1 posted 03-27-2014 08:27 PM

Sorry, NM just found this

http://lumberjocks.com/topics/17769

-- Jim from Rivertown Woodcraft | Grand Rapids, MI | www.YouTube.com/user/RivertownWoodcraft

View knotscott's profile

knotscott

8382 posts in 4151 days


#2 posted 03-27-2014 08:29 PM

In this case, I’d opt for the HF. At this price point, I wouldn’t assume that the Griz is better quality, though it might be. The Griz is basically just a blower with a single bag….for this application better quality won’t trump superior design. The HF is likely to have better filtration characteristics due to the double bag design.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View bbc557ci's profile

bbc557ci

596 posts in 2850 days


#3 posted 03-27-2014 08:30 PM

Beware the Brute….I have the HF 2(?)hp and use it with a cyclone. I initially had a plastic Brute can under the cyclone, but ye ol’ HF DC sucked in the sides of the Brute!! So either I have a super HF DC or the Brute garbage can I sought is wimpy. Regardless, I now have a metal can, and all is good.

-- Bill, central NY...no where near the "big apple"

View Jim's profile

Jim

119 posts in 2438 days


#4 posted 03-27-2014 08:32 PM

Great! Thanks guys!

-- Jim from Rivertown Woodcraft | Grand Rapids, MI | www.YouTube.com/user/RivertownWoodcraft

View Bill White's profile

Bill White

5290 posts in 4736 days


#5 posted 03-27-2014 08:55 PM

Get the HF unit, and put good bags on it.
I use the felted bags from Highland Woodworking.
Bill

-- [email protected]

View Kirk_T's profile

Kirk_T

17 posts in 4124 days


#6 posted 03-27-2014 09:23 PM

The HF DC is great! I’ve had one for 3 or 4 years now.

-- -Kirk

View SCOTSMAN's profile

SCOTSMAN

5849 posts in 4361 days


#7 posted 03-27-2014 09:39 PM

I too have three of the double bag two horse power units and they do work very good.The one horse grizzly is quite inferior IMHO and only really suitable for smaller single machines get some blast gates too and this will double up your potential. Alistair

-- excuse my typing as I have a form of parkinsons disease

View gfadvm's profile

gfadvm

14940 posts in 3466 days


#8 posted 03-28-2014 12:40 AM

I would make a chip separator like the one I blogged as your planer will fill the bag very quickly and is more trouble to empty than the chip separator. The HF looks like your best bet.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View weedsnager's profile

weedsnager

59 posts in 3211 days


#9 posted 03-28-2014 12:59 AM

I’ve had the China freight Dc for 3 or 4 years as well, It has worked great since day one.

View Sawdustmaker115's profile

Sawdustmaker115

306 posts in 2497 days


#10 posted 03-28-2014 03:57 AM

I have a HF Dc as well good unit for the price so +1 more for the HF dust collecto
btw I’ve been using it for about 5 years now, still working great

-- Anthony--http://knottywoodshop.weebly.com/

View realcowtown_eric's profile

realcowtown_eric

635 posts in 2713 days


#11 posted 03-28-2014 05:32 AM

yer second choice, the wall mount, is more to my liking, as it’s similar to a delta unit that I use.

I used to have a unit similar to your frist double bagger choice but it dint work worth crap.hopefully they’ve improved.

The delta unit, I bought for a site job for a few bucks north of 100, and liked it so much that I sold the twobagger.

Now the delta is mounted under the TS on the side, bag under the wings, don’t take up much floorspace at all.

And totally site friendly if I need to use it that way.Light, effecient, Got hoses to the
TS (of course) planer, thickness sander and chop saw. Aux hoses to drill press, band saw, belt/disc sander are at hand. albiet with a little fuss.

My floor space is at a premium….this single bag unit fits into the alcoves under the TS and works well for me. and I do put a little premium on ability to go ex-shop to site with all my equipment and devices…

Eric

-- Real_cowtown_eric

View b2rtch's profile

b2rtch

4920 posts in 3824 days


#12 posted 03-28-2014 10:34 AM

I used to have the HF, it was working great.
The HF is the best for the price.

-- Bert

View robdem's profile

robdem

381 posts in 3382 days


#13 posted 03-28-2014 11:08 AM

Have the HF collector works great for me . Have it hooked up to ts jointer bandsaw and sanding station with blast gates .

View Marcus's profile

Marcus

1165 posts in 2795 days


#14 posted 03-28-2014 01:12 PM

I have no direct experience with either, but see all kinds of great reviews of the HF collector and people really fixing them up like Bert did. I had a very similar wall hanging unit to the one you mentioned from Grizzly, except mine was from Rockler. The thing was terrible…didnt last long in my shop.

View Jim's profile

Jim

119 posts in 2438 days


#15 posted 03-28-2014 01:44 PM

Thanks guys, HF it is. Also I love what I see 3 posts up. Those filters that you guys are talking about are expensive though! Do they need to be replaced as well or are they cleanable?

-- Jim from Rivertown Woodcraft | Grand Rapids, MI | www.YouTube.com/user/RivertownWoodcraft

View HorizontalMike's profile

HorizontalMike

7873 posts in 3690 days


#16 posted 03-28-2014 01:51 PM

You blow them outside-inward with low pressure air hose, or just bang on them and watch the accumulated dust fall into the clear plastic bag below. Having a thien separator is another important improvement as well. Put this all together and you’ll have a real winner.

-- HorizontalMike -- "Woodpeckers understand..."

View Jim's profile

Jim

119 posts in 2438 days


#17 posted 03-28-2014 01:54 PM

Can someone post a link to plans for a chip separator please?

Would you do this order:

tool – chip sep. – dust can w/ thein – DC unit – filt & bag?

-- Jim from Rivertown Woodcraft | Grand Rapids, MI | www.YouTube.com/user/RivertownWoodcraft

View HorizontalMike's profile

HorizontalMike

7873 posts in 3690 days


#18 posted 03-28-2014 01:59 PM

http://lumberjocks.com/replies/on/1754200

You can find several links and examples here.

-- HorizontalMike -- "Woodpeckers understand..."

View keninblaine's profile

keninblaine

130 posts in 2378 days


#19 posted 03-29-2014 09:24 PM

The thing to watch is the particle size these units are capable of filtering. The Grizzly wall-mounted unit is only good for 30 micron filtering, which is pretty lame. The HF unit, in addition to higher flow rate, goes down to 5 microns, which is much better. And using the cartridges in place of bags can allow filtering down to 1 micron. It is that fine stuff that is the biggest problem in your lungs. I agree with others that the HF unit, with chip separator and ideally a cartridge filter in place of the bag, provides a pretty good and practical solution.

-- Ken, Blaine Washington

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com