LumberJocks

All Replies on Project for a young boy

  • Advertise with us
View richgreer's profile

Project for a young boy

by richgreer
posted 01-06-2014 12:15 AM


18 replies so far

View TopamaxSurvivor's profile

TopamaxSurvivor

20597 posts in 4725 days


#1 posted 01-06-2014 12:20 AM

Kids love bird houses and rubber band guns.

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View Ripthorn's profile

Ripthorn

1459 posts in 4034 days


#2 posted 01-06-2014 12:29 AM

When I was about that age, the first project I recall making was a pencil holder. Really it was a block with several holes drilled in it. My dad did all the sawing, I did the drilling, sanding, and simple wipe on finish. Taught me some lessons I still use to this day.

-- Brian T. - Exact science is not an exact science

View Roger's profile

Roger

21053 posts in 3853 days


#3 posted 01-06-2014 12:39 AM

A car or truck of some sort

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View distrbd's profile

distrbd

2252 posts in 3495 days


#4 posted 01-06-2014 12:39 AM

Make a wall clock with him,it’s simple to make and he’ll be looking at it everyday.

-- Ken from Ontario, Canada

View Jim Finn's profile

Jim Finn

2877 posts in 3971 days


#5 posted 01-06-2014 12:45 AM

He will love making a rubber band gun. (I sell a lot of them) You can cut it out he can sand it and help you glue the clothes pin in place. I tell boys his age that it is not a six shooter but a sister shooter. They smile at that. (Moms not so much)

-- No PHD just a DD214 Lubbock Texas

View Jim's profile

Jim

98 posts in 4140 days


#6 posted 01-06-2014 01:01 AM

How about a tool tote? Something like this:

http://dans-woodshop.blogspot.com/2012/03/tool-tote.html

-- Artificial Intelligence is no match for Natural Stupidity….

View Paul Mayer's profile

Paul Mayer

1154 posts in 4114 days


#7 posted 01-06-2014 01:02 AM

I made a sword with my son when he was about that age and it went over quite well. You could also do a pinewood derby car. I have also enjoyed making sillouhette ornaments with them on a scroll-saw, using a profile picture of them and using spray adhesive to temporarily mount it to a piece of wood. I didn’t start my kids on a scroll saw quite that young, but it might be possible if he seems capable.

The single picket fence board birdhouse design is also perfect for kids. Make a kit for him and let him nail it all together.

At age 7 my son didn’t like much idle time in the shop so the more that things were prepped and we could keep a hammer in his hand the longer he could stick with it.

Also, +1 on the rubber band gun idea. I still remember the magic of my dad making one of these for me at roughly that same age. Great memory, and would have been even better if I would have gotten to participate in building it.

-- Paul Mayer, http://youtube.com/c/toolmetrix

View Paul2274's profile

Paul2274

330 posts in 4161 days


#8 posted 01-06-2014 01:37 AM

Yea a birdhouse or a bird feeder…. dual purpose in that kind of project.
The skill in learning about woodworking and a lesson in care for animals.

Paul

View noralden22's profile

noralden22

67 posts in 2652 days


#9 posted 01-06-2014 01:52 AM

Suggested some papers and pen draws some of the things that he wants made ​​in the near future

View Dan'um Style's profile

Dan'um Style

14189 posts in 5032 days


#10 posted 01-06-2014 02:02 AM

sling shot, wooden sword, toy gun

-- keeping myself entertained ... Humor and fun lubricate the brain

View MrFid's profile

MrFid

908 posts in 2953 days


#11 posted 01-06-2014 02:03 AM

Do you have a lathe? I would think with proper supervision that he could probably do an elementary turning of some kind (between centers, not a bowl, maybe a pen?). I guess it depends on how mature the 7 year old is. If he’s anything like me when I was 7, I wouldn’t let him near a power tool until he’s about 24.

-- Bailey F - Eastern Mass.

View TopamaxSurvivor's profile

TopamaxSurvivor

20597 posts in 4725 days


#12 posted 01-06-2014 02:09 AM

A pencil and paper are dangerous items. You never know where fertile imaginations will go. But it could be the beginning of a series like my “Grandpa I need” projects ;-)

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View Grandpa's profile

Grandpa

3264 posts in 3724 days


#13 posted 01-06-2014 03:00 AM

I work with 1st through 5th grade boys at my church and am always looking for exactly what you describe. I want some thing that works them more hours than it works me building their kit. I have them build a lot of tool totes. They are held together with screws, made out of 1×6 pine with a wood dowel handle. I make a kit for them and the Cub Scouts. They can use the drill press to drill and counter sink the screw holes. I do the cutting. They can use the drill press to make the holes for the handle. I can make photos if you are interested. We make a birdhouse. Again, I cut the parts and drill holes through the plywood parts. They could drill them on a drill press. They can make the hole for the bird. They drive the nails. If you ware interested, PM me. If you have any new ideas I would be interested.

View Dark_Lightning's profile

Dark_Lightning

4511 posts in 4158 days


#14 posted 01-06-2014 03:24 AM

Your best bet is to go to the local Boy Scout Council store (“Scout Shop”) and buy the following books, even if he isn’t going to be a Cub Scout or Boy Scout:

Wolf Cub Scout Handbook
Bear Cub Scout Handbook
WEBELOS Scout Handbook
Den Chief’s Handbook (for you), since it gives all kinds of practical information about how to handle boys that age, for boys who are only a little older (like me!)- Den Chiefs are Boy Scouts who help Cub Scout Den Leaders.

The BSA has invested an immense amount of time and money figuring out how to educate boys, and there is a vast wealth of practical things for the boy to do, outside of the woodworking aspect that is covered. You can have a lot of fun with the rest of the handbooks with your (I’m assuming) grandson. For those of you who may not like some of their backwards views, that is not relevant to the psychology of the helping part.

When I volunteered for the BSA (15 years), I used shellac for projects, since the vehicle evaporates in minutes, and the boys could take them home the same night. Lacquer melts the foam brushes that I selected for the finishing. I just wanted to get the parts finished with a minimum of fuss.

-- Steven.......Random Orbital Nailer

View Mark Shymanski's profile

Mark Shymanski

5623 posts in 4762 days


#15 posted 01-06-2014 04:03 AM

Paul and I have made small boats, birdhouses and he has helped with many of ‘my’ projects. I think he enjoys the working on grownup projects the most with the wooden boats a close second. Paul can saw a straight line with my pull saw, is good at planing, hammering and is getting the hang of screws (they are more boring than hammering :-). I think the biggest thing is that it is a ‘real’ project something that isn’t obviously just busy work. I like the above idea of using the Boy Scout materials. Oh ya Paul is 8 now but we’ve been working in the shop for a couple of years now.

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

View Bernie's profile

Bernie

422 posts in 3886 days


#16 posted 01-06-2014 04:28 AM

Having 28 years experience being a Scout leader – follow Dark Lightning’s post and get a Cub book – the Wolf one is geared for 7 year old boys.

But here is a link to a rubber band shooter with a twist. The toy is a ping pong ball shooter and I will be having a few boys in my shop next month building these. Of course there will be plenty of adults to help and guide them, but a coping saw is a boy’s best friend. It’s a simple project they can execute

””Ping pong ball shooter””:http://http://boyslife.org/hobbies-projects/projects/55008/build-a-pingpong-ball-launcher/

-- Bernie: It never gets hot or cold in New Hampshire, just seasonal!

View knotscott's profile

knotscott

8415 posts in 4424 days


#17 posted 01-06-2014 10:11 AM

When my youngest boy was 6, I cut out the parts for a basic tote style tool box, predrilled the joints, and included glue, screws, and nails. I bought a Home Depot tool kit that included a small hammer, screw drivers, pliers, shop apron, and tape measure, and presented the whole thing as a gift…..he got to assemble it, and felt as though he built it. He’s 18 now, and still has it.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Jim Finn's profile

Jim Finn

2877 posts in 3971 days


#18 posted 01-06-2014 08:49 PM

A couple of ideas for you.

-- No PHD just a DD214 Lubbock Texas

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com