LumberJocks

All Replies on Watco Danish Oil Natural finish is out of stock everywhere

  • Advertise with us
View controlfreak's profile

Watco Danish Oil Natural finish is out of stock everywhere

by controlfreak
posted 03-01-2021 09:08 PM


23 replies so far

View MrUnix's profile

MrUnix

8559 posts in 3279 days


#1 posted 03-01-2021 09:15 PM

I got an almost full can you can have :)

I don’t like the stuff.. I can get the same look with wipe-on poly and not have to wait a lifetime for it to dry.

Cheers,
Brad

PS: Yes, it’s weird how it seems to be unavailable even on Amazon.

-- Brad in FL - In Dog I trust... everything else is questionable

View Rich's profile

Rich

6826 posts in 1669 days


#2 posted 03-01-2021 09:20 PM

Maybe that’s God’s way of telling you it’s a poor choice for a workbench.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View splintergroup's profile

splintergroup

5108 posts in 2302 days


#3 posted 03-01-2021 09:36 PM

I had a hard time finiding some to finish a project about 6 months ago. Scored 2 quarts. Check your local hardware stores (Ace, etc.) they have always had a full shelf when I needed some whereas the big box stores were out.

View SMP's profile

SMP

3957 posts in 985 days


#4 posted 03-01-2021 09:36 PM

Hmm, just saw some yesterday at my local HD, i’m not a fan of the stuff either. For my bench I followed Richard Maguire’s instructions and did 50/50 BLO and terps (like $10 total at Walmart), and put on “too many” coats so the last coat remains as Richard calls it “grippy”.

Another option you can buy the stuff at your BORG to make a maloof blend that would be similar to danish oil.

View controlfreak's profile

controlfreak

2079 posts in 681 days


#5 posted 03-01-2021 09:38 PM



Maybe that s God s way of telling you it s a poor choice for a workbench.

- Rich


Possibly so, which is why I included the bench wood and desired finish quality. Polyurethane I have ruled out and from what I understand BLO (my original choice) tends to get sticky over time. Looking for something that will pernitrate a little to allow some spills to be wiped up prior to staining and add color. All ideas are welcome!

View Mosquito's profile

Mosquito

11095 posts in 3372 days


#6 posted 03-01-2021 09:44 PM

I’m not sure why Danish oil is a bad finish for a workbench, it’s what I intended to use on mine but just never got around to. I’m fine with no finish on my bench after having used it that way for 7 years now. I’d use Natural Danish Oil if I was going to finish it. Maybe thin it down some, and don’t go crazy with sanding.

If you can find any, that is…

-- Mos - Twin Cities, MN - http://www.youtube.com/MosquitoMods - http://www.TheModsquito.com

View HokieKen's profile

HokieKen

17542 posts in 2218 days


#7 posted 03-01-2021 09:45 PM

Not sure what the source for BLO gettting sticky is but that’s never been an issue for me. My bench is finished with BLO and it’s served me well for several years. It’s great for keeping glue/epoxy or finishes from sticking and I put a fresh coat on once a year and it’s good to go for another 12 months.

-- I collect hobbies. There is no sense in limiting yourself (Don W) - - - - - - - - Kenny in SW VA

View controlfreak's profile

controlfreak

2079 posts in 681 days


#8 posted 03-01-2021 09:51 PM



Not sure what the source for BLO gettting sticky is but that s never been an issue for me. My bench is finished with BLO and it s served me well for several years. It s great for keeping glue/epoxy or finishes from sticking and I put a fresh coat on once a year and it s good to go for another 12 months.

- HokieKen


Since I already have the BLO it looks like you’re in the lead Kenny. How did you apply? Wipe on or brush? wipe off or let dry? I may ball up the rags and tape them tight in the driveway to see how long it takes to catch on fire.

View metolius's profile

metolius

389 posts in 1810 days


#9 posted 03-01-2021 09:54 PM

The shortage is true. I couldn’t find any for a couple months this winter; not at the home stores, not at the hardware stores.

Then I did come across some at the local department store that sells the gammit from fishing rods to boxed cereal … $18/pint too.

-- derek / oregon

View HokieKen's profile

HokieKen

17542 posts in 2218 days


#10 posted 03-01-2021 09:59 PM

Pour it on and rag it all over. Let it sit for 30-60 minutes and wipe off the excess. Repeat every 24 hours until it quits soaking in. Something I read somewhere was “1 coat a day for the first week, one coat a week for the first month, one coat a month for the first year and one coat a year for life.” I skipped the coat a month for a year and I think I probably only put on 4 or 5 coats initially but one a year seems to be a good idea and I’d give it all it will drink in off the bat. With SYP, unless it’s really dry to begin with, that may only be a couple of coats.

-- I collect hobbies. There is no sense in limiting yourself (Don W) - - - - - - - - Kenny in SW VA

View controlfreak's profile

controlfreak

2079 posts in 681 days


#11 posted 03-01-2021 10:10 PM

Kenny, for original or maintaining do you do the whole bench or just the top?

View Rich's profile

Rich

6826 posts in 1669 days


#12 posted 03-01-2021 10:12 PM


Possibly so, which is why I included the bench wood and desired finish quality. Polyurethane I have ruled out and from what I understand BLO (my original choice) tends to get sticky over time. Looking for something that will pernitrate a little to allow some spills to be wiped up prior to staining and add color. All ideas are welcome!

- controlfreak

I was being a smartass. I honestly have no idea how it would do for a work bench. Maybe it’d be awesome, but I’m among those who simply don’t like the stuff.

Kenny’s experience with BLO sounds promising. The usual reasons for BLO to be sticky is applying it too thick and adding more coats too soon. Reactive finishes need contact with oxygen, and getting it too thick too soon can inhibit the curing. You can have the same problem with Danish, or most any other reactive finish. Adding Japan drier will greatly reduce the curing time.

I don’t know enough about you or your work bench to tell you what to use, but I can share my experience when I sanded and refinished my birch top a while back. I chose OSMO Polyx-Oil based on its reputation for being durable and easy to repair. My experience with it since then has been overwhelmingly positive. It was easy to apply. I’ve had glue—PVA, epoxy and protein glue—dry on it and all of them popped right off. Once I spilled a few drops of undiluted TransTint and was unable to wipe it up for a few minutes. When I did, there was no color left behind.

I had occasion to test its repair-ability when I accidentally shoved my router plane and it carved a line out of the finish. Just doing a spot repair—no sanding, just wiping on some fresh oil—did the job. I can’t even find where the repair was done.

Is OSMO the right choice for you? Only you can decide that.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View bondogaposis's profile

bondogaposis

5986 posts in 3431 days


#13 posted 03-01-2021 10:15 PM

Just make your own 1:1:1 poly/BLO/mineral spirits.

-- Bondo Gaposis

View Smitty_Cabinetshop's profile

Smitty_Cabinetshop

17317 posts in 3698 days


#14 posted 03-01-2021 10:28 PM

I use it on my workbench, love it, but had no idea it was a hot commodity right now. Right after the last refresh I did to the bench top.

-- Don't anthropomorphize your handplanes. They hate it when you do that. - OldTools Archive -

View HokieKen's profile

HokieKen

17542 posts in 2218 days


#15 posted 03-01-2021 11:09 PM



Kenny, for original or maintaining do you do the whole bench or just the top?

- controlfreak

I sid the whole thing at first. I only do the benchtop for the annual maintenance unless the legs and stretchers look dry then I’ll give them a drink too. Oh, and the vise chops, I do them annually too.

-- I collect hobbies. There is no sense in limiting yourself (Don W) - - - - - - - - Kenny in SW VA

View Robert's profile

Robert

4554 posts in 2560 days


#16 posted 03-01-2021 11:12 PM



Just make your own 1:1:1 poly/BLO/mineral spirits.

- bondogaposis

THIS ^^^^.

Don’t use pure BLO.

-- Everything is a prototype thats why its one of a kind!!

View HokieKen's profile

HokieKen

17542 posts in 2218 days


#17 posted 03-01-2021 11:26 PM

The BLO poly mix is a good finish. I use it for tool handles and such. I just didn’t want any film on my bench so I went with straight BLO.

-- I collect hobbies. There is no sense in limiting yourself (Don W) - - - - - - - - Kenny in SW VA

View controlfreak's profile

controlfreak

2079 posts in 681 days


#18 posted 03-02-2021 12:00 AM

Yeah, I don’t want a film coating on the benchtop.

View CWWoodworking's profile

CWWoodworking

1750 posts in 1259 days


#19 posted 03-02-2021 01:07 AM



Maybe that s God s way of telling you it s a poor choice for a workbench.

- Rich

Poor choice for anything. IMO, it’s a terrible product.

View controlfreak's profile

controlfreak

2079 posts in 681 days


#20 posted 03-02-2021 02:59 AM

The jury has made a decision, first coat of BLO went on tonight. We shall see where it leads us. Thanks for all the input folks, That’s what makes this place a home!

View soedesh's profile

soedesh

1 post in 66 days


#21 posted 03-05-2021 07:49 PM

Hi, I am having the same problem finding the natural version of Watco danish oil. I’ve searched far and wide, and finally reached out to the manufacturer (Rust-Oleum) and after a couple rounds they said “We just checked internally and it seems as though we’re out of stock also – which is why you’re likely having trouble, and we apologize for that inconvenience. If you’d like to check in with us in a few weeks, we can provide an update with our inventory status.”.

View ChuckV's profile

ChuckV

3382 posts in 4607 days


#22 posted 03-05-2021 09:18 PM

I have been looking too, with no luck.

A few days ago my wife was having trouble finding crumbled feta at the grocery store. A worker found some for her and said, “You’re lucky we have any. There is a TikTok challenge involving baked feta pasta and we can’t keep it in stock.” Perhaps there is another challenge involving a recipe using danish oil. As we all know, only the natural variety is used in cooking.

-- "Join the chorus if you can. It'll make of you an honest man." - I. Anderson

View avsmusic1's profile

avsmusic1

682 posts in 1765 days


#23 posted 03-06-2021 12:28 AM



The jury has made a decision, first coat of BLO went on tonight. We shall see where it leads us. Thanks for all the input folks, That s what makes this place a home!

- controlfreak


pics or it didn’t happen ;)

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com