LumberJocks

All Replies on Looking to get my first table saw

  • Advertise with us
View riFph's profile

Looking to get my first table saw

by riFph
posted 01-09-2019 11:43 AM


18 replies so far

View Woodbum's profile

Woodbum

889 posts in 3570 days


#1 posted 01-09-2019 12:22 PM

Of the two, go with the 113 model. Based on the pictures, in my humble opinion $200 is a bit steep; having owned a 1985 similar model that I bought new and used for 24 years. I sold it 5 years ago for $125 and it had cast iron wings, a mobility kit and was MUCH cleaner. Just sayin.

-- "Now I'm just another old guy wearing funny clothes"

View Charlie H.'s profile

Charlie H.

388 posts in 1154 days


#2 posted 01-09-2019 02:12 PM

If San Diego is like Dallas the Craigslist pickings are slim when it comes to tools.
Having said that my first saw was a variant of the 113.
I would recommend not buying it.
The stamped steel extensions are not flat, the middle section of them is about 1/8” lower than the perimeter and it’s a complete pain in the rear.
The rip fence is terrible, I had to check it for parallelism every time I moved it.
Good luck.

-- Regards, Charlie in Rowlett, TX --------I talk to myself, because sometimes I need expert advice.---------

View Robert's profile

Robert

3533 posts in 1985 days


#3 posted 01-09-2019 02:16 PM

Its a big decision you don’t want to get wrong. I started out with one of those C’man tablesaws and it was a horror show. The fences are junk, the machine is underpowered and because of those two, extremely unsafe. Which is something you DON’T want for your first ts. The missing side of my thumb proves that.

So trust me I would avoid them totally. Plus the cost of adding a fence is more than the machine is worth. That said, the new model C’mans are probably OK.

Quick search yields some fantastic deals in your area!! The Powermatic is a great deal if you can swing it.

But in that price range:

This is a much better deal if you’re stuck on C(raps)man.

This is even better.

-- Everything is a prototype thats why its one of a kind!!

View JCamp's profile

JCamp

1003 posts in 1055 days


#4 posted 01-09-2019 02:39 PM

I personally like the craftsman 113 that I have. I do agree with most everyone that the $200 is almost double what it’s worth. As far as safety goes, 99.9% or table saws will cut u as well as wood if u touch the blade. The only exception that I’m aware of is the sawstop which is a $2,000 + alternative.
If you can find a nice 113 for $150 or less that has all the parts and is in good shape I’d say go for it but to me the one listed is not worth it.
I’d suggest you do one of two things. Buy the cheap $70 saw (maybe they’ll come down to $50) and use it a bit while u learn on it (then sell it with little to no loss of money) or go to Menards or some other big store and buy the cheapest belt driven saw they have. I highly suggest tht you keep away from all the contractor saws that the big box stores sell. They are fairly close to junk unless you just desire the ability to fold them up due to work space constraints.
The two links that 2156 posted above are good deals if they are still around for u to get

-- Whatsoever thy hand findeth to do, do it with all thy might

View Aj2's profile (online now)

Aj2

2475 posts in 2302 days


#5 posted 01-09-2019 03:02 PM

I think you should wait also expand your search. Don’t forget to be creative with on CL spell tablesaw one word. And with space. Table saw. Find that hidden gem

-- Aj

View Makai's profile

Makai

21 posts in 3058 days


#6 posted 01-09-2019 03:30 PM

Even though I had a Bosch Jobsite 4000 series table saw, a friend was selling his unwanted Craftsman 113- priced at $200, in much better condition than that listing, (very little rust, extra steel wing, and under table router mount). I completely rebuilt it and in hindsight it was OK at best.

Compared to the Bosch, the fence rarely locked down parallel to blade on first try, dust control was zero, and the abrupt motor startup caused the whole saw to jump a little. It did run smoothly after settling down. Not as nice as the Bosch soft-start. It didn’t come with a miter gauge and the t-slot was an odd size. I did ream the slot out enough to use the miter gauge from my Bosch. The wider table was nice, and the power was good. Sold it a year later for $200, it was not a quick sell.

For myself the Bosch was the better saw. I like working around the Bosch, and it is the one I kept. Of course the Bosch with gravity rise stand runs about $500 new, not sure about used prices.

I would not consider either one a precision saw for cabinet making.

Consider your goals and widen the search.

View riFph's profile

riFph

4 posts in 277 days


#7 posted 01-09-2019 03:35 PM

Thanks for the replies

I’ve been looking mostly at the C’mans because there are a lot of threads about them and, with the exception of the fence, seemed to be well regarded.

rwe2156, I saw the Delta saw, but what little I found about them didn’t seem promising. Lesser quality and super loud, and no dust control. If they are decent I will spend some more time researching them.

Aj2, yes, Tablesaw, Table saw, and even just saw.

View jonah's profile

jonah

2077 posts in 3803 days


#8 posted 01-09-2019 03:41 PM

The fences on those old 113s are truly crap. If you’re resolved to go with one of those (they have the advantage of being plentiful, after all), plan on spending some money for a better fence. Or, keep your eye out for a decent deal on better hybrid or cabinet saw.

Whichever saw you get, make sure you align it carefully and get a new blade for it.

View bondogaposis's profile

bondogaposis

5538 posts in 2855 days


#9 posted 01-09-2019 04:53 PM

Keep looking, don’t be in a hurry and a good deal will come your way. You can certainly do better than those 2 saws.

-- Bondo Gaposis

View AllSweptUpChimney's profile

AllSweptUpChimney

6 posts in 311 days


#10 posted 01-09-2019 06:28 PM

I’d agree with everyone else about the 113. It’s definitely not worth that, but it’s not beyond me to give a low offer on stuff like that. Some folks just have unreasonable expectations or don’t really know what something is worth. It doesn’t hurt to give a fair price offer.

-- All Swept Up Chimney Services. https://allsweptupchimney.com, Chimney repair in Indianapolis, Indiana

View WoodenDreams's profile

WoodenDreams

728 posts in 415 days


#11 posted 01-09-2019 06:56 PM

I’d pass on both. but if I had to choose between them I’d offer $100 on the 113., It’s only a 1hp, missing the fence, and needs a major clean up. The only positive note is that the table surface can be cleaned up and you may be able to make a inexpensive straight edge fence yourself.

View steve104c's profile

steve104c

52 posts in 1743 days


#12 posted 01-10-2019 12:09 AM

I see a lot of rust. Make sure it runs before you buy. Before plunging in and starting it, hand turn the arbor. If in turns freely,the other rust can be removed without a problem. The first saw looks like a copy of a Delt 10” contractors saw. $200.00 is a good price.Steve.

View mrg's profile

mrg

860 posts in 3504 days


#13 posted 01-10-2019 01:11 AM

You didn’t say what your budget is but there is a decent Delta https://sandiego.craigslist.org/nsd/tls/d/vista-table-saw-10/6779696073.html that you could talk them down. It looks clean from the pictures.

This Dewalt and Penn State dust colector that look almost new. https://sandiego.craigslist.org/csd/tls/d/san-diego-dewalt-table-saw-penn-state/6790230629.html

-- mrg

View riFph's profile

riFph

4 posts in 277 days


#14 posted 01-11-2019 11:25 PM

I’m back two days later with another one.

https://sandiego.craigslist.org/csd/tls/d/san-diego-ridgid-10-table-saw/6792407508.html

He says it was his dads but thinks it’s not much more than five years old. It looks like it a rigid 2424 made by Emerson around 2000. I’m going to try and check it out tomorrow.

View Ilan's profile

Ilan

17 posts in 1108 days


#15 posted 01-13-2019 03:07 AM

I agree. I moved from San Diego to DFW a couple of years ago and I was shocked how both areas have such a terrible second hand power tool market.

to the OP – If you’re a beginner, I’d get something with a riving knife.


If San Diego is like Dallas the Craigslist pickings are slim when it comes to tools.
Having said that my first saw was a variant of the 113.
I would recommend not buying it.
The stamped steel extensions are not flat, the middle section of them is about 1/8” lower than the perimeter and it s a complete pain in the rear.
The rip fence is terrible, I had to check it for parallelism every time I moved it.
Good luck.

- Charlie H.


View riFph's profile

riFph

4 posts in 277 days


#16 posted 01-21-2019 01:54 AM

Well after chasing a few ads and getting led on and ignored, I finally found a saw. I contacted a seller 30min after he posted a Rigid TS3650 for $100.

It was a work saw for 10 years, the base has been resprayed orange at least once, a few bolts have been replaced, there is a 2 inch dent in the cast iron top, but the saw runs really well.

So far I’ve tightened all the bolts, aligned the blade, and started sanding the little bit of rust off the top and replacing the adjustable feet which were rusted solid.

View Sawdust2012's profile

Sawdust2012

178 posts in 2217 days


#17 posted 01-21-2019 02:01 AM

That was my first TS also. You can do a lot with it. Congratulations!

View Charlie H.'s profile

Charlie H.

388 posts in 1154 days


#18 posted 01-21-2019 09:55 PM

I don’t have experience with that saw, but it’s fairly popular and at $100 you can’t get hurt financially with it.
After you get it polished up post a picture.

-- Regards, Charlie in Rowlett, TX --------I talk to myself, because sometimes I need expert advice.---------

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com