LumberJocks

All Replies on sealing log ends

  • Advertise with us
View Karda's profile

sealing log ends

by Karda
posted 12-19-2018 06:38 PM


15 replies so far

View AZWoody's profile

AZWoody

1440 posts in 1589 days


#1 posted 12-19-2018 06:41 PM

Latex paint. Go to a big box store and ask for any returns they have. You should get it really cheap or even free.

View Karda's profile

Karda

1486 posts in 919 days


#2 posted 12-19-2018 06:42 PM

even below freezing

View MrUnix's profile

MrUnix

7362 posts in 2564 days


#3 posted 12-19-2018 07:00 PM

even below freezing
- Karda

According to where you are listed in your profile, it’s 41ᵒF where you are right now (@1:30pm) and isn’t expected to get below freezing until the weekend. Even then, you can paint latex indoors since it’s water based and pretty much odorless.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View HokieKen's profile

HokieKen

9254 posts in 1503 days


#4 posted 12-19-2018 07:14 PM

The idea is to seal the ends so even if the latex doesn’t fully cure, as long as it stays on and fully covers the endgrain, it’ll do it’s job. And you can always recoat if/when necessary.

-- Kenny, SW VA, Go Hokies!!!

View avsmusic1's profile

avsmusic1

398 posts in 1050 days


#5 posted 12-19-2018 07:58 PM

agree on paint
However, how long ago were these logs cut? Are you just leaving them full for turning or are you going to use a bandsaw to mill boards?

View Karda's profile

Karda

1486 posts in 919 days


#6 posted 12-19-2018 11:20 PM

I don’t know how long the logs have been cut But I think awhile, I think the guy that offered them cuts as he needs so I don’t think they are fresh cut but he said the are still green. What I normaly do is cuyt them into billets then store and cut up before i turn. I have to have them small enough for the band saw because I don’t have the cut capacity to resaw them. The wood this time is walnut

View Bmezz's profile

Bmezz

50 posts in 1748 days


#7 posted 12-20-2018 12:18 AM

Lee valley has log sealer. Works in Canada.
http://www.leevalley.com/en/wood/page.aspx?p=20099&cat=1,190,42942

-- Member Valley Woodturners Ottawa. Member AAW

View TheDane's profile

TheDane

5637 posts in 4028 days


#8 posted 12-20-2018 03:20 AM

PVA Drywall Primer … goes for about $10 a gallon at most home centers. Put two coats on.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View Karda's profile

Karda

1486 posts in 919 days


#9 posted 12-20-2018 05:04 AM

ok I’ll look for it can it be used when very cold

View therealSteveN's profile

therealSteveN

2633 posts in 939 days


#10 posted 12-20-2018 05:22 AM



I don t know how long the logs have been cut But I think awhile,

- Karda

The article I am linking to has 2 pieces of info.

One that Tar coating for driveways is a good alternative to Anchorseal.

But the most important part is. End-coat all logs as soon as possible after the tree is felled to prevent rapid drying of log ends.

That is the gem, because a lot of sawyers aren’t seeing the downed trees for sometimes months, before they are onsite, and milling, and when they are saying ASAP, they mean that day. A tree can lose a significance amount of moisture in the first 24 hours. Those logs lose it from the ends first. Sealing a tree weeks to months later may be good for wood identification at a later date, but you aren’t likely to stop much checking.

-- Think safe, be safe

View Karda's profile

Karda

1486 posts in 919 days


#11 posted 12-20-2018 06:07 AM

the logs are already sealed

View TheDane's profile

TheDane

5637 posts in 4028 days


#12 posted 12-20-2018 02:34 PM

ok I ll look for it can it be used when very cold

No, but I coat them in the shop then move them to my storage room which get pretty chilly. Only takes about 30 minutes for a coat to dry.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View Karda's profile

Karda

1486 posts in 919 days


#13 posted 12-20-2018 09:02 PM

ok thanks

View bondogaposis's profile

bondogaposis

5371 posts in 2716 days


#14 posted 12-20-2018 09:43 PM

I’ve used Kilz II to good effect.

-- Bondo Gaposis

View Karda's profile

Karda

1486 posts in 919 days


#15 posted 12-20-2018 10:46 PM

never thought of that

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com