LumberJocks

All Replies on Should I spackle this gap between wood and trim?

  • Advertise with us
View RickDel's profile

Should I spackle this gap between wood and trim?

by RickDel
posted 12-18-2018 03:54 AM


19 replies so far

View cracknpop's profile

cracknpop

368 posts in 2907 days


#1 posted 12-18-2018 04:06 AM

First off, WELCOME to LumberJocks!

Fill it or not? I don’t believe there is a right or wrong answer here. What do you prefer?
That being said, if I was painting it, I would fill it.

Good luck!

-- Rick - I know I am not perfect, but I will keep pressing on toward the goal of becoming all I am called to be.

View RickDel's profile

RickDel

10 posts in 354 days


#2 posted 12-18-2018 04:13 AM

Thank you! I think I’ll fill it too. I was just curious what you guys with experience would do. Thanks!

View TheFridge's profile

TheFridge

10859 posts in 2044 days


#3 posted 12-18-2018 04:25 AM

If it’s to be painted, I’d just caulk it.

If it’s to stay distressed, I’d just burn it.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View bgilb's profile

bgilb

101 posts in 3617 days


#4 posted 12-18-2018 06:39 AM

Spackle will will just end up cracking do you’ll need to caulk instead.

View therealSteveN's profile

therealSteveN

4285 posts in 1132 days


#5 posted 12-18-2018 07:32 AM

If you only paint it, after a pretty short interval it will crack, and be uglier than you’ll want. I’d use a good quality caulk and let it dry a bit before painting.

-- Think safe, be safe

View AlaskaGuy's profile

AlaskaGuy

5420 posts in 2867 days


#6 posted 12-18-2018 07:41 AM

View Woodbum's profile

Woodbum

898 posts in 3624 days


#7 posted 12-18-2018 01:07 PM

Welcome to LJ’s ! As was said, if it is to be painted, caulk and paint. If it is to be finished otherwise, re-cut. Work Safely, Have Fun and Good Luck!

-- "Now I'm just another old guy wearing funny clothes"

View clin's profile

clin

1072 posts in 1554 days


#8 posted 12-18-2018 04:49 PM

Another vote for caulking it.

-- Clin

View LesB's profile

LesB

2231 posts in 4001 days


#9 posted 12-18-2018 05:16 PM

Caulking is the answer but make sure it is a paintable type.

-- Les B, Oregon

View RickDel's profile

RickDel

10 posts in 354 days


#10 posted 12-18-2018 05:30 PM

Man, that’s a lot of responses… I definitely came to the right place. THANK YOU!!

I’m going to caulk it and spray it will latex.

QUESTIONS: Just to be clear, I should caulk because wood filler / spackle can crack, right? Should the caulk bead be thin and flush with the two pieces or should it be proud and rounded out from the gap?

That might be a dumb question, but I find myself spending a ton of time researching things like that since I don’t much experience.

Thanks Again!!

View RickDel's profile

RickDel

10 posts in 354 days


#11 posted 12-18-2018 06:39 PM

“Should the caulk bead be thin and flush with the two pieces or should it be proud and rounded out from the gap?”

I actually already filled the gap with caulk. It was so small I had to lay a small bead and then run a flat edge over it to smooth it flat. In the smallest gaps the caulk pulled out, but I’m pretty confident those areas will be concealed by paint.

View 000's profile

000

2859 posts in 1458 days


#12 posted 12-18-2018 06:43 PM

Get you a wet rag. wet your finger, smooth the caulk into the joint, wipe finger off on rag, repeat.

View runswithscissors's profile

runswithscissors

3081 posts in 2583 days


#13 posted 12-19-2018 01:46 AM

It’s “painters’ caulk” you want. Designed for that purpose. I’m surprised nobody mentioned this (though they sort of implied it).

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View AlaskaGuy's profile

AlaskaGuy

5420 posts in 2867 days


#14 posted 12-19-2018 02:02 AM



It s “painters caulk” you want. Designed for that purpose. I m surprised nobody mentioned this (though they sort of implied it).

- runswithscissors


Did you read my post?

-- Alaskan's for Global warming!

View RickDel's profile

RickDel

10 posts in 354 days


#15 posted 12-19-2018 02:04 AM

I used what I already had: Alex Plus 10.1 oz. White Acrylic Latex Caulk Plus Silicone because its labeled as “paintable caulk”. The “painter’s caulk” doesn’t appear have silicone so I hope that doesn’t give me a problem.

View 000's profile

000

2859 posts in 1458 days


#16 posted 12-19-2018 02:04 AM

*

View TheFridge's profile

TheFridge

10859 posts in 2044 days


#17 posted 12-19-2018 02:11 AM



Get you a wet rag. wet your finger, smooth the caulk into the joint, wipe finger off on rag, repeat.

- jbay

Throw in 5 gal bucket with a gallon of water (to wash the excess caulk off said rag) and you can tackle any caulk job.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View 000's profile

000

2859 posts in 1458 days


#18 posted 12-19-2018 02:13 AM


Get you a wet rag. wet your finger, smooth the caulk into the joint, wipe finger off on rag, repeat.

- jbay

Throw in 5 gal bucket with a gallon of water (to wash the excess caulk off said rag) and you can tackle any caulk job.

- TheFridge

That’s a definite must. Clean rag makes clean work.

View Dark_Lightning's profile

Dark_Lightning

3675 posts in 3667 days


#19 posted 12-19-2018 03:09 AM

FWIW, I built a knotty pine book case many years ago, and put a crown molding on it. There were some gaps that I filled with almond colored caulk, which in any lighting environment didn’t show. It was a great cheat.

-- Steven.......Random Orbital Nailer

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com