LumberJocks

All Replies on makita 2030n feed roller shaft

  • Advertise with us
View segelflieger's profile

makita 2030n feed roller shaft

by segelflieger
posted 12-12-2018 01:23 PM


3 replies so far

View TheFridge's profile

TheFridge

10859 posts in 2047 days


#1 posted 12-12-2018 11:43 PM

If a part can’t be found, I’d take it (the original) to a machine shop and hear their thoughts. I’d probably have them turn the shaft down and press fit a sleeve on that to take it to the original OD for the bearing or whatnot.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View MrUnix's profile

MrUnix

7530 posts in 2760 days


#2 posted 12-13-2018 12:01 AM

I don’t see how it would be possible to install the plain bearings wrong, or in any way that would cause damage to the roller shaft… although lack of lubrication might cause premature wear. Anyway, since you have the original shaft, it should be fairly easy to take to a machine shop to either buildup the damaged area and then turn it down to size, turn it smaller and insert a bushing/sleeve like Fridge suggests, or just turn a new shaft (there isn’t anything special about it in terms of machining). Once you have the repaired shaft, then you can get someone like Western Roller to re-cover it.

Cheers,
Brad

PS: There are a few aftermarket suppliers who suggest they still have them in stock – just do a google search for the part number. One of them may actually still have one sitting on the shelf.

-- Brad in FL - In Dog I trust... everything else is questionable

View segelflieger's profile

segelflieger

3 posts in 362 days


#3 posted 12-13-2018 12:44 AM

Thanks guys for the response,,, I will post a pic of the block and shaft damage… besides that this machine is in excellent shape. One hobby owner its whole life, norust, nada….
Yea I have access to a machine shop, that is the next option…Just put it out there to see if anyone had one laying around… (Rebuilt a PM combo sander that had to have a shaft made due to wear.)

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com