LumberJocks

All Replies on Advise needed! Missing cabinet doors, what to do!

  • Advertise with us
View ScottKaye's profile

Advise needed! Missing cabinet doors, what to do!

by ScottKaye
posted 12-09-2018 10:11 PM


15 replies so far

View MikeDilday's profile

MikeDilday

257 posts in 853 days


#1 posted 12-09-2018 10:44 PM

A little more detail about the doors would help. They look like they are some sort of smooth panel with a piece of wood on one edge? Is the piece of wood shaped to be used to open and close the door/drawer? Your options are replace all the doors, make a replacement or just let them deal with it.

-- Michael Dilday, Suffolk, Va.

View LesB's profile

LesB

2093 posts in 3837 days


#2 posted 12-09-2018 11:06 PM

It will be hard to match the color on the door panels.
So I would consider making glass paneled doors (clear glass or maybe opaque (frosted), colored, or patterned glass) using a frame that matches the cabinet bases. If necessary or if it is possible switch some of the existing doors around so you can locate the replacement in a visibly better spot. Or even replace some of the other doors to create what would look like a designed pattern of glass panel doors.

-- Les B, Oregon

View MikeDilday's profile

MikeDilday

257 posts in 853 days


#3 posted 12-09-2018 11:22 PM

What material is the cream colored panel?

-- Michael Dilday, Suffolk, Va.

View ScottKaye's profile

ScottKaye

764 posts in 2347 days


#4 posted 12-09-2018 11:44 PM

I haven’t seen them in person in years as I never go down to their basement. So I’m in the same boat as you guys trying to figure things out from a photo! However, inferencing from the pictures, they are most definitely covered in Formica, an ugly tan color at that. They appear to have a solid strip of wood (dark oak stained) at the top/bottom that also doubles as hand pulls that runs the width of the door tops/bottom depending on which door you are looking at.

Hope this helps

-- "Nothing happens until you build it"

View Rayne's profile

Rayne

1209 posts in 1933 days


#5 posted 12-09-2018 11:48 PM

How about keeping it simple and turning that cabinet into an open shelf system. It looks good from here, so just remove / repair the hinge holes, tidy it up, and leave it open as a feature.

View SMP's profile

SMP

1058 posts in 299 days


#6 posted 12-09-2018 11:48 PM

To be honest i would take them off and give them a “credit” in the price negotiations.

View Rayne's profile

Rayne

1209 posts in 1933 days


#7 posted 12-09-2018 11:49 PM

As I post this, I completely did not see the bottom door missing. I got fixated to the upper cabinets. I’ll have to think about the bottom one.

View Jeff's profile

Jeff

507 posts in 3588 days


#8 posted 12-09-2018 11:58 PM

I can’t imagine that would make any significant difference to a potential buyer. Tidy it up, maybe fill any screw holes left by the hinges.

View GR8HUNTER's profile

GR8HUNTER

6106 posts in 1106 days


#9 posted 12-10-2018 12:01 AM

maybe new owners might just rip it out anyways but if has to be fixed I would get MDF for base throw away the right one let the top open as display or put wine bottle racks in it with stem ware holders :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View FirehouseWoodworking's profile

FirehouseWoodworking

736 posts in 3667 days


#10 posted 12-10-2018 12:25 AM

Simplest thing, if you do not want to give buyers credit or go the open shelf route, would be to replace all the doors. Let the buyers decide.

Since this is the mother-in-law suite, it doesn’t need to be fancy. Make slab doors out of MDF and edge and cover the faces with laminate. You can match the two false drawer fronts, or even replace them as well.

Rather than trying to replicate the wooden pulls, you could add simple pulls.

Good luck! Cheers!

-- Dave; Lansing, Kansas

View 000's profile

000

2859 posts in 1293 days


#11 posted 12-10-2018 02:00 AM

Looks like a typical Almond melamine door with taped edges with a
continuous door pull.

Some examples of door pulls: (scroll down)
https://walzcraft.com/product-category/moldings-accent-components/?product-type-34671=1#

View CaptainKlutz's profile

CaptainKlutz

1379 posts in 1888 days


#12 posted 12-10-2018 05:01 AM

IMHO – Want to replace the missing doors, or at least make it look uniform and remove complimentary doors to what is already missing and call it a feature. It is never a good idea to allow a required major repair like this to be part of price negotiations. ALLOWS have repairs done before showing/selling house.

One option is replace all cabinet doors with new ones. Ikea sells full overlay cabinet doors separately in standard sizes. Find new complimentary color, double check dimensions, buy doors and drawer fronts, and install. Cost ~$30-$50 per door panel.

If time is more important than money due impending sale, and you want max sale price; just hire a cabinet make over company to make all new doors. Might spend $100 cabinet, but if done right – remodeled cabinet fronts can add sell price .vs ugly cabinet doors.

If if were me and I was making passable replacement doors on budget:
1) I would take an existing door to home depot and look for spray can enamel that matched. If none can be found, have them mix a quart of outdoor gloss front door enamel paint with matching color. Laminate is expensive, and matching aged laminate is impossible.
2) Use some 3/4 MDF and cut new doors to size, minus the finger molding. fill imperfections with dry wall repair compound, sand smooth, then spray 2 coats of paint. Made many a garage cabinet door this way.
3) Find a stain/varnish combo that is close original wood trim color, cut some similar molding, finish, and attach to door.
4) Hang new doors and sell house as is with no discussion about door repairs needed.

Best Luck.

-- I'm an engineer not a woodworker, but I can randomly find useful tools and furniture inside a pile of lumber!

View robscastle's profile

robscastle

6157 posts in 2598 days


#13 posted 12-10-2018 05:45 AM

I would be tempted to leave them “as is” ... mainly due to their age and matching diffculties along with the possibility (as other LJs have said) the new owners may want to change them anyway.

-- Regards Rob

View Woodknack's profile

Woodknack

12812 posts in 2774 days


#14 posted 12-10-2018 06:58 AM

Around here they would be ripped out first thing anyway. Unless you plan on remodeling the kitchen and putting in granite + new appliances, don’t bother.

-- Rick M, http://thewoodknack.blogspot.com/

View Robert's profile

Robert

3403 posts in 1874 days


#15 posted 12-10-2018 02:38 PM

I would talk to him some and explain whoever buys the house will most likely rip it all out anyway and fixing won’t add any value.

If it were me, I would replace the cabs, the flooring and consider the appliances. Its one of the best returns you can get on selling a house.

-- Everything is a prototype thats why its one of a kind!!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com