LumberJocks

All Replies on Knife scales

  • Advertise with us
View Mark Shultz's profile

Knife scales

by Mark Shultz
posted 12-07-2018 08:08 PM


6 replies so far

View GrantA's profile

GrantA

1479 posts in 1767 days


#1 posted 12-07-2018 08:28 PM

Sand all the way. Hand or power, router sounds like a terrible idea!

View HokieKen's profile (online now)

HokieKen

9214 posts in 1498 days


#2 posted 12-07-2018 08:33 PM

I agree with Grant. Router is totally unnecessary. I take the scales down to within 1/32” of the tang using a coarse belt on my 1×30 belt sander. Then I do my countour shaping on the scales until they’re how I want them. Then I put a fine grit belt on, finish flushing the scales to the tang and sand the marks from the coarse belt out. Finally I hand sand until I’m satisfied that I’ve removed any marks from the belt sander and finish by using buffing compound on a cotton wheel. I’ll polish the spine of the knife at the same time so it ends up with the same finish as the tang.

-- Kenny, SW VA, Go Hokies!!!

View Mark Shultz's profile

Mark Shultz

117 posts in 2750 days


#3 posted 12-07-2018 11:48 PM

Thanks guys. That sounds smart

Any advice on finishing scales (stabalized)?

View HokieKen's profile (online now)

HokieKen

9214 posts in 1498 days


#4 posted 12-08-2018 12:58 PM

No finish for me usually with stabilized scales Mark. I find that they polish out really nicely and the stabilizing resin provides a nice hardness. When I do finish scales, I really like Tru Oil. 3 light coats, 0000 steel wool between coats then buff the final coat out with a cotton rag.

-- Kenny, SW VA, Go Hokies!!!

View GrantA's profile

GrantA

1479 posts in 1767 days


#5 posted 12-08-2018 01:27 PM

Tru oil, just put your gloved finger over the top of the bottle and tip it over. That gives more than enough for a coat. I do that 4-5 times to build a coat then steel wool then at least a couple more coats.
Here’s one i did with stabilized sinker cypress and probably 8-10 coats of tru oil.

View Aj2's profile

Aj2

2197 posts in 2158 days


#6 posted 12-08-2018 04:17 PM

Nice blade Grant. I like it

-- Aj

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com