LumberJocks

All Replies on Ridgid JP0610 Jointer - Help needed please

  • Advertise with us
View MadGerman's profile

Ridgid JP0610 Jointer - Help needed please

by MadGerman
posted 12-06-2018 06:36 PM


7 replies so far

View HokieKen's profile

HokieKen

8719 posts in 1441 days


#1 posted 12-06-2018 06:59 PM

Start with it looser than you think it should be, 1” barely pushing. Then tighten it up if/when it slips. Better too loose than too tight. Too loose, it might slip. Too tight, it can put undue stress on the motor and cutterhead bearings.

-- Kenny, SW VA, Go Hokies!!!

View CaptainKlutz's profile

CaptainKlutz

956 posts in 1797 days


#2 posted 12-06-2018 07:44 PM

+1 What Hokie said ^^^^^^^

Had one of those for several years. The weight of motor provides tension on belt when bolt is loose. So you want to push hard enough to lift 1.5HP motor slightly, which is pushing on belt with some decent force.

-- I'm an engineer not a woodworker, but I can randomly find useful tools and furniture inside a pile of lumber!

View bgilb's profile

bgilb

93 posts in 3362 days


#3 posted 12-07-2018 05:16 AM

In the manual it explains you can use the weight of the motor to get the tension right.

View MadGerman's profile

MadGerman

48 posts in 2365 days


#4 posted 12-07-2018 11:49 AM



In the manual it explains you can use the weight of the motor to get the tension right.

- bgilb

I saw that. I was wondering if that would add too much tension. I guess when the unit is upright, the motor will “settle in” to its “natural” position, providing the proper belt tension?

I suppose I can go ahead and flip it upright and set the tension that way. FWIW, my Jet table saw is designed so that the weight of the motor provides the required belt tension. Perhaps the Ridgid jointer is no different.

Maybe I’m overthinking it…?

View ChefHDAN's profile

ChefHDAN

1336 posts in 3152 days


#5 posted 12-07-2018 12:11 PM

Yes, you’re overthinking it, I set mine up as directed in the manual, and have not had to make any adjustments or changes in 12 years. Not the greatest jointer in the world, but for the money & my needs its a great tool

-- I've decided 1 mistake is really 2 opportunities to learn.. learn how to fix it... and learn how to not repeat it

View Joeswoodshop's profile

Joeswoodshop

5 posts in 114 days


#6 posted 12-07-2018 03:40 PM

I have same one. Used weight of motor. Also I added a link belt to reduce vibration.

View MadGerman's profile

MadGerman

48 posts in 2365 days


#7 posted 12-10-2018 01:16 AM

Thanks again for the input guys. I didn’t have a chance to work on the jointer this weekend, but when I do, I’ll sit it upright and adjust the belt tension by letting the weight of the motor do it.

I’m looking forward to getting it up and running. Since it’s winter, my motorcycling is on hold, so why not make sawdust, right?

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com