LumberJocks

All Replies on Will SS overarm DC fit my PM 2000 table saw?

  • Advertise with us
View jamar1's profile

Will SS overarm DC fit my PM 2000 table saw?

by jamar1
posted 12-04-2018 11:26 PM


7 replies so far

View runswithscissors's profile

runswithscissors

3081 posts in 2568 days


#1 posted 12-05-2018 04:51 AM

Shark Guard makes one that should work on your saw.

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View Fred Hargis's profile

Fred Hargis

5809 posts in 3036 days


#2 posted 12-05-2018 11:42 AM

I think the only change they made to the Excalibur design is the color of the paint. I have the original Excalibur (before the SS purchase) on my SS…they may have tweaked some of the hardware but it wouldn’t be something you couldn’t overcome.

-- Our village hasn't lost it's idiot, he was elected to congress.

View jamar1's profile

jamar1

14 posts in 423 days


#3 posted 12-07-2018 04:35 AM

Fred -that’s what i thought. I’m going to order one. I’ll update when I have it installed.
Thanks

View jimintx's profile

jimintx

926 posts in 2127 days


#4 posted 12-07-2018 04:15 PM

I want to add an overhead dust collector, too.
Thus, a question for you, jamar1:

What leads you to choose the Sawstop version rather than the Sharkguard product?
Thanks!

-- Jim, Houston, TX

View jamar1's profile

jamar1

14 posts in 423 days


#5 posted 12-08-2018 12:35 AM

Jim-
I glanced at it once, but since you asked, I went back and carefully read the details.
I must be missing something, but I don’t see any mention of how to mount incoming dust collection.
If it must come from the ceiling, I’m out.
I do like the design and the replacable parts, but dust collection needs to be easy and maneuverable in my mind.
Thoughts or insight appreciated.

View jimintx's profile

jimintx

926 posts in 2127 days


#6 posted 12-08-2018 05:57 PM

I am not speaking from direct experience. I am a fairly technical type guy, and I can visualize well, but I don’t have any overhead DC on my t-saw. I would like to have it, if i could get comfortable with it not interfering with my sight lines to the blade as it cuts, and didn’t interfere with any material handling movements.

It looks to me like a number of the Sharkguard installs have the horizontal arm that holds the device and the suction hose in place are using some element of their own dust collection piping. Perhaps you saw that and are saying you want to purchase the suction pipe horizontal arm from the maker, rather than use your own piping. On the shark guard site, there are links to photos and installs, that show such setups. Here is one
http://www.thesharkguard.com/images/Delta/mp2.jpg

ALSO OF NOTE:
Here is the one offered by Penn State, currently on sale for a good price at $160
https://www.pennstateind.com/store/TSGUARD.html?gclid=EAIaIQobChMI8cqb4-SQ3wIVQ7nACh172gWbEAQYBCABEgIF1fD_BwE

I consider them a reliable supplier, but I have not seen one of their systems in person.

-- Jim, Houston, TX

View Fred Hargis's profile

Fred Hargis

5809 posts in 3036 days


#7 posted 12-08-2018 06:07 PM

I’ll chime in here. My last saw was a Unisaw, and I had outfitted with a Shark Guard. I came across the Excalibur mentioned above on one of these forums at a very good price, so I bought it and swapped the Shark out. On my unisaw I actually liked the Shark better. My Unisaw had a snap in Bies splitter, and the shark used the clamp from it as the mount. To move the Shark I simply pulled a plunger and tit came loose. I would just lay it to side when it wasn’t needed. But you do need to come in from the top with your DC hookup, for me that wasn’t a problem since I had a duct run at the end of the extension for the cabinet. I actually intended to replace the Excalibur with the Shark, but before I did I sold the Uni and the Shark went with it. The replacement was a SS and I put the Excalibur on it. Here’s a pic of the way I hooked the Shark up:

-- Our village hasn't lost it's idiot, he was elected to congress.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com