LumberJocks

All Replies on Repairing warped barn door

  • Advertise with us
View vgV's profile

Repairing warped barn door

by vgV
posted 12-04-2018 05:34 PM


10 replies so far

View Aj2's profile

Aj2

2057 posts in 2097 days


#1 posted 12-04-2018 06:17 PM

No that’s beyond repair.
Build a new one buy wood from a lumber yard that’s kiln dried. Store and sticker the wood to lay flat. Buy extra and use only the best ones to remake the door.
Ok

-- Aj

View JCamp's profile

JCamp

934 posts in 849 days


#2 posted 12-04-2018 06:21 PM

I don’t know what all the hardware if called but they make stuff to straighten those doors out. It’s basically a couple screws with eye holes and threaded piece that u can tighten to bring the door back down. I’ve seen them on Amish buildings but never had to use them. Hopefully someone here will know the technical words for it.
Btw I think the door looks great.

-- Whatsoever thy hand findeth to do, do it with all thy might

View Scap's profile

Scap

71 posts in 226 days


#3 posted 12-04-2018 06:23 PM



I don’t know what all the hardware if called but they make stuff to straighten those doors out. It’s basically a couple screws with eye holes and threaded piece that u can tighten to bring the door back down. I’ve seen them on Amish buildings but never had to use them. Hopefully someone here will know the technical words for it.
Btw I think the door looks great.

- JCamp

Turnbuckle?

View vgV's profile

vgV

4 posts in 107 days


#4 posted 12-04-2018 06:29 PM

I was thinking about using Turnbuckle https://www.youtube.com/watch?v=s9avOb6EH58 https://www.youtube.com/watch?v=Db5TiyyXeIY
but wasn’t sure it it would let me straighten this door because it big.
I also found this https://www.youtube.com/watch?v=5eVnfPkdLpc but not sure what is the name of this product

View John Smith's profile

John Smith

1681 posts in 461 days


#5 posted 12-04-2018 07:12 PM

there was a very similar post identical to this one a few months ago. (use the search feature).
basically using the turnbuckles and cables to pull it back into shape.
[I think the author of that post wound up making a new door].
I agree with a higher quality wood and avoid extreme acclimation issues.

.

.

-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View Aj2's profile

Aj2

2057 posts in 2097 days


#6 posted 12-04-2018 07:21 PM

Are the panel’s floating or are they glued together. If they dont have room to move in a groove top and bottom your construction method needs improvement.

-- Aj

View vgV's profile

vgV

4 posts in 107 days


#7 posted 12-04-2018 07:29 PM

The panel’s are glued together and frame brace is nailed in(finishing nails). I used Biscuits on the sides and mortise and tenon joint one the ends

View Smitty_Cabinetshop's profile

Smitty_Cabinetshop

16035 posts in 2917 days


#8 posted 12-04-2018 07:35 PM

Sorry, but if it is going to be spelled panel’s then at least be consistent and say nail’s and biscuit’s and side’s and end’s.

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

View Aj2's profile

Aj2

2057 posts in 2097 days


#9 posted 12-04-2018 08:43 PM



The panel’s are glued together and frame brace is nailed in(finishing nails). I used Biscuits on the sides and mortise and tenon joint one the ends

I think your door warped because of your construction. It’s very common for new woodworkers to build their first few projects too stiff or shiny.
Don’t feel bad everyone does it. Just make a new one with proper construction

-- Aj

View MikeDilday's profile

MikeDilday

141 posts in 758 days


#10 posted 12-05-2018 12:00 AM

Take a cable & turnbuckle and block in the middle of the door to bend it slightly beyond straight and check it daily. It will straighten back out.

-- Michael Dilday, Suffolk, Va.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com