LumberJocks

All Replies on Krenov jointer questions.

  • Advertise with us
View Mark Shultz's profile

Krenov jointer questions.

by Mark Shultz
posted 12-03-2018 02:18 PM


3 replies so far

View Derek Cohen's profile

Derek Cohen

422 posts in 4270 days


#1 posted 12-03-2018 02:39 PM

1. Do not glue the cross pin. It rotates. It is also not a round pin but a triangle. Look at plans – this is the heart-and-soul of the Krenov plane.

2. see above.

3. The chipbreaker matters all the time. I do not know whether Krenov used a chipbreaker. However, he sent me a smoother of his, and the chipbreaker was not set for a shaving. Nevertheless, on edges as well as faces, you want to avoid tearout.

4. The iron needs to be higher than the wedge since you need to hit it. The wedge projects in front of the iron, where it is accessible.

Regards from Perth

Derek

-- Buildiing furniture, and reviewing and building tools at http://www.inthewoodshop.com

View Mark Shultz's profile

Mark Shultz

117 posts in 2692 days


#2 posted 12-03-2018 03:40 PM

Thanks Derek. And nice website!.

Thanks for the comments. That’s why i was asking here – i see plans and videos of folks glueing the pin. FWW shows rounded, but one flat side, no glue. but i trust LJ more.

last question. is the Hock 3.5” long enough to make it stick out? It seems a 2.5” plane height would make a 3.5” blade @ 45degrees barely long enough.

View Derek Cohen's profile

Derek Cohen

422 posts in 4270 days


#3 posted 12-03-2018 03:58 PM

Hi Mark

Here are two Krenov planes – one is a high angle smoother, and the other a low angle block plane …

This is a cutaway …

Link to the build: http://www.inthewoodshop.com/ShopMadeTools/BuildingaKrenovSmoother.html

I’m not sure how long the Hock blades are, but they were developed specifically for Krenov.

Regards from Perth

Derek

-- Buildiing furniture, and reviewing and building tools at http://www.inthewoodshop.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com