LumberJocks

All Replies on combination outfeed table, assembly table, work bench

  • Advertise with us
View Woodenwizard's profile

combination outfeed table, assembly table, work bench

by Woodenwizard
posted 11-30-2018 06:35 PM


6 replies so far

View Holbs's profile

Holbs

2225 posts in 2507 days


#1 posted 11-30-2018 09:02 PM

Must be outfeed, assembly, workbench project month!
I am in the midst of the same.
I will be doing outfeed table height 1/8” (to be determined…have to take into account expansion since using douglas fir 4×6 legs and such) lower than table saw height with miter slot cut outs.
While 1/2” does not seem to matter, consider when ripping hardwood that will not droop much. That 1/2” would be rather noticeable when it comes to handling and pushing through the saw blade.

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter "xylokopos/ξυλοκὀπος"

View Monty151's profile

Monty151

77 posts in 319 days


#2 posted 11-30-2018 09:04 PM

Hey Wizard,

I think it really is a matter of preference. I built my outfeed table level with my table saw, and routed the miter slots in it. I like having that smooth transition from table saw to outfeed.

Good luck with your build

View Andybb's profile

Andybb

2016 posts in 1081 days


#3 posted 11-30-2018 09:44 PM

Router slots for sled just in case so you might as well take 10 mins now and cut them and same height (1/8” is probably ok too) to eliminate long pieces dropping down and lifting the part still in the blade.

JMHO

-- Andy - Seattle USA

View Lenny's profile

Lenny

1638 posts in 4005 days


#4 posted 12-01-2018 02:33 AM

John, I am inclined to also recommend that you rout miter slots. If you do, remember to account for the washer (if that’s what it is called) thingy at the bottom of the miter gauge. The first time I routed mine, I did them at 3/4” only to have widen them for that thing.

-- On the eighth day God was back in His woodworking shop! Lenny, East Providence, RI

View Not Here's profile

Not Here

30 posts in 137 days


#5 posted 05-02-2019 03:42 PM

I built my table saw into an outfeed table so I have the miter slots. You can see it here: https://youtu.be/YCotMv07h5o

View Thalweg's profile

Thalweg

103 posts in 3884 days


#6 posted 05-02-2019 03:49 PM

I made mine with miter slots, but I also put adjustable feet on it so it could easily be lowered. Therefore, it could be changed so the miter gauge passes above the table.
Pictures are here: https://www.lumberjocks.com/projects/78877

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com