LumberJocks

All Replies on Band Saw Veneer Issues

  • Advertise with us
View bwad40's profile

Band Saw Veneer Issues

by bwad40
posted 11-28-2018 05:04 PM


6 replies so far

View Julian's profile

Julian

1463 posts in 2993 days


#1 posted 11-28-2018 05:08 PM

There are several good videos on how to properly set up a bandsaw (on YouTube). It could be your blade is not set properly on the wheels, or a dull blade, or a few other things.

-- Julian

View Rink's profile

Rink

99 posts in 340 days


#2 posted 11-28-2018 05:43 PM

I’ve been going through the same thing. You can check out some of the suggestions on my thread. I got distracted with some woodturning for now, but I’ve ordered a new Iturra spring. Once it comes and I try to resaw again, I’ll post my results.

View bwad40's profile

bwad40

18 posts in 1254 days


#3 posted 11-28-2018 06:11 PM

Thanks guys! I will checkout that thread and the YouTube video on tune up. I am thinking that it is my dull blade.

View Aj2's profile

Aj2

2063 posts in 2100 days


#4 posted 11-28-2018 06:27 PM

I always start with a new blade for important resawing. I’m resawing Cherry at 3/32 for curved laminations. When I’m done I’ll take this blade off and put on a general purpose blade.
Save a good resaw blade for resawing.
I said resawing four times in one post new record. Me :)

-- Aj

View HokieKen's profile

HokieKen

8715 posts in 1441 days


#5 posted 11-28-2018 06:31 PM

If you think your blade might be dull, your blade is dull. And you’ll never get good veneer with a dull blade.

-- Kenny, SW VA, Go Hokies!!!

View Rich's profile (online now)

Rich

4156 posts in 892 days


#6 posted 11-28-2018 06:34 PM


I always start with a new blade for important resawing. I’m resawing Cherry at 3/32 for curved laminations. When I’m done I’ll take this blade off and put on a general purpose blade.
Save a good resaw blade for resawing.
I said resawing four times in one post new record. Me :)

- Aj2

A resaw repeat :)

+1 on the sharp blade. Also use one designed for resawing with a variable pitch tooth pattern, hooked teeth and as wide as your saw can handle.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com