LumberJocks

All Replies on Help me, please. Torsion in Live Edge Pedestal Table

  • Advertise with us
View Danmadethat's profile

Help me, please. Torsion in Live Edge Pedestal Table

by Danmadethat
posted 11-27-2018 07:18 PM


5 replies so far

View torus's profile

torus

339 posts in 947 days


#1 posted 11-27-2018 10:20 PM

From pure physics, I think it is your pedestal.
It is quite easy to test – put 3 quick-grip clamps around in the middle of the height of the pedestal, from edge to edge. If my theory is correct you should see that vibration is reduced

More experienced LJ’s can give you advice how to beef up the pedestal.

-- "It's getting better..." - put this on my RIP stone!

View Danmadethat's profile

Danmadethat

3 posts in 349 days


#2 posted 11-27-2018 10:30 PM

Thank you, torus. Will give it a go

View Davevand's profile

Davevand

129 posts in 1370 days


#3 posted 11-27-2018 10:42 PM

I also think it is your pedestal. It looks really nice but much too small for the size of your table top. The triangle center piece is the only thing supporting the twisting action.

View Manitario's profile

Manitario

2783 posts in 3416 days


#4 posted 11-28-2018 12:15 AM

When you twist it, the force is through the thickness of the live edge supports. Similar to if you had a thin board and you held it by opposite corners and tried to twist it. So, given the size of the top, when you apply a rotational force to it, it puts the torque through the thickness of the supports, which are not thick enough to prevent the twisting.

Not sure how I’d fix it though without a full re-do of the base using thicker live edge slabs.

-- Sometimes the creative process requires foul language. -- Charles Neil

View Danmadethat's profile

Danmadethat

3 posts in 349 days


#5 posted 11-28-2018 02:16 AM

So…input from a couple of structural engineers say a thicker “stem” piece will do the trick. A couple more said to reinforce the triangle at the top, another said to attach a metal plate to the center of the triangle and attach the top to it, taking forces off of the “spokes” created by the triangle.

Thinking I will do a full re-do using a thicker pedestal piece to run the slabs from—at that point, the slabs will be more for show than structural support, and the structural support will be the stem piece alone.

Going to try adding a couple of metal brackets to the triangle and see if that helps. I’d really like to keep the aesthetics (within reason) and gain stability no matter the ultimate route.

Thanks for everyone’s input on this. Really, really aprreciate it

-Dan

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com