LumberJocks

All Replies on Is this leg vise worth anything?

  • Advertise with us
View JohnMcClure's profile

Is this leg vise worth anything?

by JohnMcClure
posted 11-27-2018 12:36 AM


6 replies so far

View JCamp's profile

JCamp

1011 posts in 1094 days


#1 posted 11-27-2018 01:56 AM

No clue on its value but if u could make a nut for it then it would be fairly useful for a woodworkers bench.

-- Whatsoever thy hand findeth to do, do it with all thy might

View JohnMcClure's profile

JohnMcClure

799 posts in 1184 days


#2 posted 11-27-2018 02:47 AM

Checked benchcrafted and their hardware kit is in the $200 range! So assuming a nut is doable, this could be valuable. But not to me, I don’t need one! I am happy with my big eclipse QR.

-- I'd rather be a hammer than a nail

View jmartel's profile

jmartel

8604 posts in 2694 days


#3 posted 11-27-2018 02:54 AM



Checked benchcrafted and their hardware kit is in the $200 range! So assuming a nut is doable, this could be valuable. But not to me, I don t need one! I am happy with my big eclipse QR.

- JohnMcClure

You should really compare it more to something like this:

http://www.leevalley.com/us/Wood/page.aspx?p=41664&cat=1,41659

Benchcrafted stuff is specialty hardware that is way nicer than what you have.

For the nut, it’s probably an ACME thread. Try to look for a nut on McMaster.

-- The quality of one's woodworking is directly related to the amount of flannel worn.

View JohnMcClure's profile

JohnMcClure

799 posts in 1184 days


#4 posted 11-27-2018 12:12 PM

Thanks, didn’t know these were so easily available. Knowing this, the antique dealer will probably overprice it at $40 or $50, it will sit in the store for a year until someone buys it, spray paints it white, and hangs it on their living room wall as-is for a “farmhouse” look.

You should really compare it more to something like this:

http://www.leevalley.com/us/Wood/page.aspx?p=41664&cat=1,41659

Benchcrafted stuff is specialty hardware that is way nicer than what you have.

For the nut, it s probably an ACME thread. Try to look for a nut on McMaster.

- jmartel


-- I'd rather be a hammer than a nail

View LittleShaver's profile

LittleShaver

598 posts in 1163 days


#5 posted 11-27-2018 06:27 PM

I picked up a leg vise screw and nut at a flea market for $15. It sat around the house for about 5 years until I finally built a Moravian Bench. Nearly the best $15 I ever spent at a flea.

-- Sawdust Maker

View JDierking's profile

JDierking

7 posts in 835 days


#6 posted 11-28-2018 06:14 PM

Looks pretty similar to the Yost screw I paid $35 for on Amazon.

http://lumberjocks.com/projects/332505

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com