LumberJocks

All Replies on Bailey No. 3 wood plane question

  • Advertise with us
View NCJOB's profile

Bailey No. 3 wood plane question

by NCJOB
posted 11-27-2018 12:01 AM


6 replies so far

View bandit571's profile

bandit571

22995 posts in 3078 days


#1 posted 11-27-2018 12:34 AM

Over on ebay, there is a store called nhplaneparts ( New Hampshire Plane Parts) Eric should have all the parts you need. You can even contact him to ask what parts to get.

-- A Planer? I'M the planer, this is what I use

View KYtoolsmith's profile

KYtoolsmith

78 posts in 255 days


#2 posted 11-27-2018 12:56 AM

Jeff, sound like the plane bug has bitten again! As to Stanley’s Bailey pattern plane parts interchange, a No. 3 takes a 1 3/4” iron (blade), chip breaker and lever cap. Interchangeable with a No. 5 1/4. You are correct on the lever cap for a pre- 1933 plane being keyhole instead of kidney release hole. If you care to be period correct, earlier lever caps before 1925 do not have the word “STANLEY” on them… Just plain. I have a “few” parts here. I have been restoring Stanley planes for some time… Send me a message and I’ll see what I have that might match your needs.
Regards, The Kentucky Toolsmith!

-- "Good enough" is just another way of saying "it could be better"...

View NCJOB's profile

NCJOB

7 posts in 211 days


#3 posted 11-27-2018 03:44 PM

bandit57, I checked out nhplaneparts and yes, it looks like he has about every plane part known to man. Think I will probably be visiting his store often.

KYtoolsmith, very helpful information. Yes, the plane bug has bitten. Not sure if that is a good or bad thing, but I have found I get a LOT of satisfaction using a hand plane. Results are so much better than the power planer. A little more work, but the wood looks and feels so nice. Not ready to get ride of the power planer, but I will definitely reach for the hand plane more often. I currently have a No. 5, No. 4, and a block plane. Have a No. 3 that I will be attempting to restore and I am looking for a No. 7. Also, I am going to attempt to build a router plane from scratch. Should prove to be an interesting project. Think that will give me what I need to get started down the hand plan path.

Thank you both for the great information. Glad I discovered this site.

Jeff

-- Jeff, NC

View NCJOB's profile

NCJOB

7 posts in 211 days


#4 posted 11-27-2018 03:52 PM

KYtoolsmith – I am new to the forum so I cannot sent a PM until I have 5 posts. Hopefully, you will see this. What I believe I have is a Stanley Bailey No. 3 Type 9. On the toe it has Bailey and No. 3 and behind the frog I have two dates from 1902 (I think there are only two – have over a hundred years of crud to clean off). The main thing I am looking for at this point is the iron cap. If you have one, please let me know. I am assuming you will be able to PM me and if I can do two more posts, I should be able to PM you.

Thanks!

Jeff

-- Jeff, NC

View KYtoolsmith's profile

KYtoolsmith

78 posts in 255 days


#5 posted 11-27-2018 05:08 PM

Jeff, just checked my stash… I do have a lever cap for a No. 3 type 9 – 11. Not show quality, but definitely a good user. The lever spring has some pitting but otherwise great shape. Also have a period correct chip breaker with blued back, and a later chip breaker, not blued. Either are great users. Have a few No. 3 irons, later types from 1933 to 1945 era planes.

Regards, The Kentucky Toolsmith!

-- "Good enough" is just another way of saying "it could be better"...

View NCJOB's profile

NCJOB

7 posts in 211 days


#6 posted 11-27-2018 06:29 PM

KYtoolsmith – thank you. This should be my fifth post so hopefully I can PM you shortly

Jeff

-- Jeff, NC

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com