LumberJocks

All Replies on label on motor says "DC Motor" but also "115v 60hz"

  • Advertise with us
View MrOrangeKitty's profile

label on motor says "DC Motor" but also "115v 60hz"

by MrOrangeKitty
posted 11-23-2018 11:46 PM


3 replies so far

View PurpLev's profile

PurpLev

8552 posts in 4182 days


#1 posted 11-23-2018 11:59 PM

he AC from the wall is being converted to DC for the motor by a controller that also provides with the variable speed functionality.

what is the experience you are seeing when you turn the lathe on?

the motor should have 2 wires running to it. can you check with a volt meter if it is getting the needed voltage? that would help you figure out if it’s the controller or the motor (same goes for the controller inputs)

-- ㊍ When in doubt - There is no doubt - Go the safer route.

View Woodknack's profile

Woodknack

12924 posts in 2914 days


#2 posted 11-24-2018 04:18 AM

Double check the controller box. Mine filled up with dust causing it to overheat and shut off.

-- Rick M, http://thewoodknack.blogspot.com/

View AHuxley's profile

AHuxley

874 posts in 3855 days


#3 posted 11-24-2018 11:58 AM


Teknatool (the maker of the Nova Comet II) does not carry parts for the Comet II anymore. Any ideas on where to look for parts?

The Comet II is a current production lathe, no? Are you saying you can’t get parts from them for a currently made machine?

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com