LumberJocks

All Replies on Torque inserts on a Spiral cutter

  • Advertise with us
View nitehorse's profile

Torque inserts on a Spiral cutter

by nitehorse
posted 11-22-2018 05:06 PM


5 replies so far

View waho6o9's profile (online now)

waho6o9

8648 posts in 2966 days


#1 posted 11-22-2018 05:12 PM

7. Lubricate the Torx screw threads with a very small amount of light machine oil, wipe the excess off, and torque the screw to 50–55 inch/pounds.

https://cdn0.grizzly.com/manuals/g0453z_m.pdf

Best of luck!

View Aj2's profile

Aj2

2271 posts in 2187 days


#2 posted 11-22-2018 05:16 PM

Are you looking at wrenches for inch pounds. Not ft pounds.
I wouldn’t mess with it yet because they are easy to crack. But then I understand your concerns. I dont trust strangers with my machinery set up.

-- Aj

View TheFridge's profile

TheFridge

10858 posts in 1875 days


#3 posted 11-22-2018 05:34 PM

If it’s a Byrd head I wouldn’t worry.

I bought a 1/4” in-lb torque wrench and it was at the very low end of its range if I remember correctly.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Fred Hargis's profile

Fred Hargis

5545 posts in 2882 days


#4 posted 11-22-2018 05:53 PM

I have one that looks like a screwdriver I use, my inserts only get set to 45 inch pounds (Byrd).

-- Our village hasn't lost it's idiot, he was elected to congress.

View nitehorse's profile

nitehorse

65 posts in 509 days


#5 posted 11-25-2018 07:19 PM

Thank you all.

Yes I am looking for a in/lbs torque wrench.
I have read that it is a good idea to check the factory settings and also the inserts are a bit finicky to get set in place properly. We shall see :)
After some more on-line searching it seems the screw driver type might be the way to go. RAK and Vortex have decent reviews. I truly do not know how much hand strength is needed but I will see if I can try one out at a store.
Jim

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com