LumberJocks

All Replies on chisel sharpening?

  • Advertise with us
View Oldschoolguy's profile

chisel sharpening?

by Oldschoolguy
posted 11-20-2018 03:08 PM


11 replies so far

View syenefarmer's profile

syenefarmer

528 posts in 3468 days


#1 posted 11-20-2018 03:12 PM

View Holt's profile

Holt

280 posts in 3017 days


#2 posted 11-20-2018 03:20 PM

Worksharp 3000 is about $175 from Amazon. it works well as is for chisels. Wide blade attachment for plane blades runs about $55.

-- ...Specialization is for insects.

View John Smith's profile

John Smith

1828 posts in 550 days


#3 posted 11-20-2018 05:53 PM

the Grizzly T10010ANV – 10” Wet Grinder Kit is on sale now for $120.00
I have had it for over a year now and am very satisfied with it.

I have had the WOODTEK water cooled sharpening machine with a 1000 grit stone for 20 years.

it is not on sale and runs about $140.00. just depends on your budget and how you like
or don’t like machines as most members here sort of lean towards the diamond or natural stones.

the simple tool holder is a great investment and if you search around, can be found for 10-$15.00

.

-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View HokieKen's profile

HokieKen

9496 posts in 1526 days


#4 posted 11-20-2018 06:28 PM



Worksharp 3000 is about $175 from Amazon. it works well as is for chisels. Wide blade attachment for plane blades runs about $55.

- Holt

+1 if that’s in your budget. I too like the wide blade attachment for plane irons. But, you can do irons up to 2” in the chisel port as well so the added expense isn’t necessary.

If your budget isn’t so much and you already have stones of some sort, then the guide like syenefarmer linked in the first comment works well for plane blades. IMO, it requires some modification to work well for chisels though.

A middle-of-the-road budget option would be the Veritas guides. Either Mk1 or Mk2 depending on how much you want to spend and how much flexibility you need in the system.

-- Kenny, SW VA, Go Hokies!!!

View Aj2's profile

Aj2

2266 posts in 2186 days


#5 posted 11-20-2018 06:54 PM

My suggestion is a bench grinder with a Norton Aluminum oxide white wheel.
Hollow grind your chisels and plane blades. Then go directly to a very fine grit water stone. The hollow grind makes it very easy to free hand look up side sharpening.
You can train your hands to do this.

-- Aj

View AlaskaGuy's profile

AlaskaGuy

5278 posts in 2697 days


#6 posted 11-20-2018 08:00 PM

I think this would be a good video to go along with Aj2’s post.

https://youtu.be/KljbyeueOtE

And don’t forget to prepare the back of the chisel. It needs to be flatten and polished up some.

There are tons of sharpening video on YouTube. What a bunch of them because there are many ways to reach your golds.

-- Alaskan's for Global warming!

View AlaskaGuy's profile

AlaskaGuy

5278 posts in 2697 days


#7 posted 11-20-2018 08:58 PM



the Grizzly T10010ANV – 10” Wet Grinder Kit is on sale now for $120.00
I have had it for over a year now and am very satisfied with it.

I have had the WOODTEK water cooled sharpening machine with a 1000 grit stone for 20 years.

it is not on sale and runs about $140.00. just depends on your budget and how you like
or don t like machines as most members here sort of lean towards the diamond or natural stones.

the simple tool holder is a great investment and if you search around, can be found for 10-$15.00

.

- John Smith


That jig can also be improve on

https://youtu.be/QBHd7x6ySSQ

-- Alaskan's for Global warming!

View AlaskaGuy's profile

AlaskaGuy

5278 posts in 2697 days


#8 posted 11-21-2018 08:35 AM

https://youtu.be/5yj16u7udlw

-- Alaskan's for Global warming!

View HokieKen's profile

HokieKen

9496 posts in 1526 days


#9 posted 11-21-2018 02:03 PM

Here’s another video from LN on modifying common eclipse-style honing guides.

-- Kenny, SW VA, Go Hokies!!!

View Robert's profile (online now)

Robert

3397 posts in 1869 days


#10 posted 11-21-2018 02:11 PM

I would encourage you to keep practicing free hand sharpening.

I consider it a hand skill to be mastered no different than using any hand tool in ww’ing.

But if its just too daunting, I would go with the Worksharp. You won’t have a bunch of money tied up in stones that way.

-- Everything is a prototype thats why its one of a kind!!

View Tony1212's profile (online now)

Tony1212

316 posts in 2122 days


#11 posted 11-26-2018 02:21 PM

I’ll plug my own YouTube channel here:

Flattening the backs of plane irons
https://www.youtube.com/watch?v=MVjUlk4J-lU&t=1s

Inexpensive sharpening jig (Well, inexpensive if you already have the diamond plates. But you can use sandpaper on MDF if you like.)
https://www.youtube.com/watch?v=E4gdwMAW40k&t=4s

-- Tony, SW Chicago Suburbs

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com