LumberJocks

All Replies on What kind of clamp is this?

  • Advertise with us
View ColonelTravis's profile

What kind of clamp is this?

by ColonelTravis
posted 11-14-2018 04:53 AM


17 replies so far

View theoldfart's profile

theoldfart

11043 posts in 3052 days


#1 posted 11-14-2018 05:08 AM

I’ve seen those clamps used to pinch hoses used in pond fountains and filters to regulate flow.

-- "With every tool obtained, there is another that is needed" DonW ( Kevin )

View Rich's profile

Rich

5126 posts in 1190 days


#2 posted 11-14-2018 05:14 AM

I have a couple of the Veritas offerings. They work well and you can keep a variety of stick lengths. By using the brass pins, you can have a large bar gauge that can measure down to an inch or less. Sorry that doesn’t answer your question.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View rustynails's profile

rustynails

883 posts in 3130 days


#3 posted 11-14-2018 06:33 AM

Its a Hoffman tubing clamp sold on Amazon…. I have the Veritas ones and like them.

https://images-na.ssl-images-amazon.com/images/I/31ZgbdRN7aL.jpg

SEOH 1.37inch(35mm) Nickel Plated Brass Hoffman Tubing Clamp
3.4 out of 5 stars 4 customer reviews
Price: $7.49 & FREE Shipping. Details
New (3) from $7.16 & FREE shipping.

Also you can just use binder clips

View Johnny7's profile

Johnny7

478 posts in 1691 days


#4 posted 11-14-2018 07:04 AM

nice sleuthing, rustynails

View rustynails's profile

rustynails

883 posts in 3130 days


#5 posted 11-14-2018 08:46 AM



nice sleuthing, rustynails

- Johnny7

Just got lucky :)

View robscastle's profile

robscastle

6675 posts in 2805 days


#6 posted 11-14-2018 09:41 AM

Can somebody please clamp wqwq’s neck with it?

-- Regards Rob

View ColonelTravis's profile

ColonelTravis

1976 posts in 2495 days


#7 posted 11-14-2018 08:02 PM

Rusty FTW!
thank you, sir. I searched for all kinds of clamps but “tubing” wasn’t part of it.

Nothing against Veritas, I have spent a lot of money with them. Just wanted to try this way.

Found it for a little less on amazon, if anyone cares – $5.88 and free shipping.

View brtech's profile

brtech

1066 posts in 3523 days


#8 posted 11-14-2018 08:40 PM

ColonelTravis, the one you linked to is way too small I think. The $7 one is 1.3 inches and the one you linked to is .3 inches

View HokieKen's profile

HokieKen

11982 posts in 1739 days


#9 posted 11-14-2018 08:41 PM

The first review on Amazon reveals the real motivation CT ;-)

-- Kenny, SW VA, Go Hokies!!!

View robscastle's profile

robscastle

6675 posts in 2805 days


#10 posted 11-18-2018 04:49 AM

I use them all the time I find it helps me stay focused when I am working the wood!

Do you wanna see a picture !!!

-- Regards Rob

View Picklehead's profile

Picklehead

1055 posts in 2530 days


#11 posted 11-18-2018 12:01 PM

Could also cut down on those pesky bathroom breaks that interrupt the “flow” of your work!

-- Quote from ebay tool listing: " Has nicks and dings wear and tear dust and dirt rust and pitting but in good working condition"

View Andybb's profile (online now)

Andybb

2333 posts in 1204 days


#12 posted 11-18-2018 08:23 PM


I use them all the time I find it helps me stay focused when I am working the wood!

Do you wanna see a picture !!!

- robscastle

LMMFAO! I don’t care who you are there, that’s funny!

-- Andy - Seattle USA

View ColonelTravis's profile

ColonelTravis

1976 posts in 2495 days


#13 posted 11-18-2018 08:25 PM


ColonelTravis, the one you linked to is way too small I think. The $7 one is 1.3 inches and the one you linked to is .3 inches

- brtech

You are correct. This one is indeed smaller than the one David uses and I wish I had been as careful reading the size difference as you were. You can still use it to make one, but I am sending it back for two reasons – I’d prefer the larger one and does this look like it’s made of brass? The description said brass.

No.

EDIT – actually, the larger one says nickel plated brass, so that might be what the small one is also, looks like some brass color coming through? Whatever. Going back.

If anyone wants mine for the reason Kenny highlighted, I can’t help you out, sorry. Sending it back.

Rob – thank you sir. I, ah, trust you without the photos!

View HokieKen's profile

HokieKen

11982 posts in 1739 days


#14 posted 11-18-2018 08:27 PM

I love this site ;-)

-- Kenny, SW VA, Go Hokies!!!

View robscastle's profile

robscastle

6675 posts in 2805 days


#15 posted 11-30-2018 09:50 AM

OK

-- Regards Rob

View HokieKen's profile

HokieKen

11982 posts in 1739 days


#16 posted 11-30-2018 11:35 AM

Yeah Positive site. Where did you come up with your information?

-- Kenny, SW VA, Go Hokies!!!

View robscastle's profile

robscastle

6675 posts in 2805 days


#17 posted 12-03-2018 12:49 PM

https://en.wikipedia.org/wiki/List_of_sniper_rifles
Scanning down the list,...
Looks like The CheyTac Intervention should sort the problem out.

-- Regards Rob

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com