All Replies on Shop Heat Brr

  • Advertise with us
View mer500's profile

Shop Heat Brr

by mer500
posted 11-12-2018 12:44 PM

6 replies so far

View EarlS's profile


3774 posts in 3152 days

#1 posted 11-12-2018 01:02 PM

I have a Farenheat and it does a good job of holding the temperature in my insulated 2 stall garage shop. Price was decent and installation was easy. I just replaced the thermostat after 5 years or so. The unit I have doesn’t have a wall thermostat so I bought a stand alone temperature gauge so I know what the temperature is. I keep it at 50 deg or so when I’m not in the shop and turn it up to 65 or so when I’m working. I know which mark on the thermostat knob corresponds to those temperatures so changing the setting is a matter of moving the knob to the appropriate mark. Because the heater is mounted on the ceiling it is a bit of a chore to get a stool every time the setting needs to be changed.

If you can get some insulation in your shop walls and ceiling it would be $$ well spent as well.

-- Earl "I'm a pessamist - generally that increases the chance that things will turn out better than expected"

View Tony1212's profile


438 posts in 2539 days

#2 posted 11-12-2018 02:29 PM

I converted our single car garage into a rec room. The walls are concrete and un-insulated, but there is insulation in the ceiling. One wall is shared with the heated house.

We just use an electric oil heater and we can easily get it up to 70 in there when it’s way below freezing outside (Chicago area).

My shop is in a fully insulated detached 3 car garage. I use a 240V electric heater in there since running a gas line to the garage is a financial impossibility. I can get that space into the upper 60’s during the worst of winter.

-- Tony, SW Chicago Suburbs

View GrantA's profile (online now)


2671 posts in 2212 days

#3 posted 11-12-2018 02:43 PM

I have a ProFusion ceiling mounted one from Northern Tool and it’s GREAT! I’m in south GA so I’m right there with ya, don’t use it a lot but it sure is nice to have! I’d suggest working on insulating the shop too though

View GR8HUNTER's profile


7656 posts in 1517 days

#4 posted 11-12-2018 02:56 PM

I use propane forced hot air heater I live in Pa. can get temp up fast form say 30 to 70 in just an hour witch in turn causes big tools and cabinet tools to sweat in an uninsulated 12×34 shed I cannot hold that temp. to good I know I need insulation but looking fo someone who dont itch for 1 year after touching it LOL :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View mer500's profile


31 posts in 1143 days

#5 posted 11-12-2018 03:55 PM

Yeah I am leaning toward the Pro Fusion unit from NT for 149.99. has 2 heat zones, more cfm, btu etc..

Waiting to hear back on the shipping cost lol

View PPBart's profile


87 posts in 635 days

#6 posted 11-12-2018 05:02 PM

My shop is only 12×24 with walls (only) insulated. Here in Louisiana summer heat is usually more of a problem than winter cold—but for those few days when it gets really cold (for me, that’s below 50F in the shop) I have some infrared lamps that help a lot.

-- PPBart

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics