LumberJocks

All Replies on looking for a scrapper

  • Advertise with us
View 3285jeff's profile

looking for a scrapper

by 3285jeff
posted 11-12-2018 01:37 AM


6 replies so far

View John Smith's profile

John Smith

1678 posts in 459 days


#1 posted 11-12-2018 02:11 AM

can you modify one of the tools you don’t need ?

Penn State Ind. has some
https://www.pennstateind.com/store/LX130.html

.

.

-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View splintergroup's profile

splintergroup

2572 posts in 1518 days


#2 posted 11-12-2018 02:50 PM

You can use 1/4” steel shafting. The cheap stuff is soft enough to get a burr. Drill rod will work if you grind the end flush and sharp. Alternatively you can often use forester bits that have a flat area on the cutting end.

View Wildwood's profile

Wildwood

2570 posts in 2431 days


#3 posted 11-12-2018 03:46 PM

Other than Sorby not sure any other tool manufacturer makes a 1/4” width round nose scraper. Most start with 1/2” width round nose scrapers in various thickness from 1/4” to 1/2”.

As already mentioned might be easier to make your own tool from 1/4” steel.

Think the smallest round carbide scraper they sell is 8mm slightly larger than 1/4”. may find less expensive vendor elsewhere.

http://www.carbidedepot.com/wood-turning.aspx

-- Bill

View LeeMills's profile

LeeMills

650 posts in 1597 days


#4 posted 11-12-2018 06:14 PM

If you don’t mind making your own WTtools sells 1/4” sq X 8” long for $6 in the HSS with 5% cobalt.
They also have the standard HSS (no cobalt) for $4.
https://www.wttool.com/index/page/product/product_id/51327/category_id/15882/product_name/RDX+Ground+Square+Tool+Bits

-- We cannot solve our problems with the same thinking we used when we created them. Albert Einstein

View bigJohninvegas's profile

bigJohninvegas

584 posts in 1758 days


#5 posted 11-12-2018 07:07 PM

View Wildwood's profile

Wildwood

2570 posts in 2431 days


#6 posted 11-12-2018 08:21 PM

Items like this have limit use, so not many vendors stock them! If call this vendor might be able to get you one if prepared to wait.

https://www.hartvilletool.com/product/1539/scrapers

Negative rake scrapers held differently than regular scrapers and can provide a smoother finish on most wood surfaces. Some pen turners use them but mostly bowl turners. Scroll down to video:

http://www.easywoodtools.com/buy-here/

JMHO would not pay a lot for tool might have to modify to get results desired. Both beading & parting tools need to be modified to become negative rake scrapers

While Packard Woodworks says their beading parting tool can be used as negative scraper Craft Suppiles doesn’t mention their Kyro scraper can.

http://www.packardwoodworks.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=packard&Product_Code=100115&Category_Code=tools-pkrd-beadpart

Used on bowls and platters.
https://www.youtube.com/watch?v=9Hai4ia7UX0

-- Bill

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com