LumberJocks

All Replies on Recommendations for Circular Saw Blade Sharpening

  • Advertise with us
View gauntlet21's profile

Recommendations for Circular Saw Blade Sharpening

by gauntlet21
posted 11-05-2018 06:35 PM


12 replies so far

View therealSteveN's profile

therealSteveN

2782 posts in 959 days


#1 posted 11-06-2018 04:25 AM

If I was going to send away. I used to get in touch with Scott. Across the country he is listed by many as the guy to go to. Scott Whiting

Scott’s Sharpening Service
5214 West Luke Avenue 7
Glendale, AZ 85301
Phone: (623) 931-0633
Web: Scottssharpening.com
Scott’s Sharpening Service is a privately held company in Glendale, AZ and is a Unknown business.

Categorized under Sharpening Services. Our records show it was established in 1989 and incorporated in Arizona. Current estimates show this company has an annual revenue of less than $500,000 and employs a staff of approximately 1 to 4.

Website addy

I had sent my blades. bits, knives, whatever needed sharpening to Scott for years. In the last few years the local WoodCraft has signed on with a local guy. Great prices, awesome work, and turn around is always 1 week. Drop off the goods, come back the following week, and pick up the sharp stuff. It fits my needs better. Plus it’s an excuse to go over to WoodCraft. I love to torture myself. Seriously I try to feed the local as much business as I can without just giving away money. If it’s 25% less at Amazoo, I’m buying at Amazoo. If it’s close, I’ll always try to support the local, so it keeps being the local.

-- Think safe, be safe

View John_'s profile

John_

202 posts in 2090 days


#2 posted 11-06-2018 06:23 AM

I have sent my blades off to Forrest for sharpening. Their pricing was comparable to what I would have paid locally, and the cost of shipping was offset by not having to drive 50 miles round trip to drop them off and then pick them up again

A 12” blade will just fit inside a large USPS flat rate box. Here is a link to their pricing
https://www.forrestblades.com/forrest-factory-carbide-saw-blade-sharpening/

I also considered using Leitz – they are the ones 25 miles from me. Note, I don’t buy ‘cheap’ blades and I want them sharpened correctly
http://www.leitztooling.com/sharpening-services.htm

View Fred Hargis's profile

Fred Hargis

5535 posts in 2878 days


#3 posted 11-06-2018 11:38 AM

Of the suggestions I would make, Scott Whiting is certainly one to consider. I’ve also had very good results with 2 others. Bull Sharpening in Oak Park IL (recently renamed 3B Saw and Tool)is the one I use most. The second would be Dynamic Saw in Buffalo NY, both places are full service sharpening shops (they do it all) and both do excellent work for very good prices.

-- Our village hasn't lost it's idiot, he was elected to congress.

View Blindhog's profile

Blindhog

122 posts in 1433 days


#4 posted 11-06-2018 01:12 PM

I’ll second the Forrest team. I sent 3 blades, a dado set (hit alum track and triggered SS cartridge) and 4 router bits. All came back very sharp. It did take apx. 3 weeks to get them back.

-- Don't let perfection get in the way of plenty good enough

View gauntlet21's profile

gauntlet21

69 posts in 595 days


#5 posted 11-06-2018 02:08 PM

Thanks for the info, I’ll take a look at Forrest as well as Woodcraft and the Scott Whiting option. Thanks for the info and great recommendations. Someday soon I’ll work my way up to a Forrest blade but haven’t quite needed to yet. That’s primarily because I’m always cutting everything a 16th or 32nd of an inch long and finishing the edge up with a shooting board and hand plane or chisel or sandpaper if need be. I’ve had good results with some of the mid-priced blades however as long as I’m using a zero clearance insert or some kind of backing. I believe it is time, however, to send a few blades out to get re-tuned.

Thanks again,

Dan

View GR8HUNTER's profile

GR8HUNTER

6061 posts in 1097 days


#6 posted 11-06-2018 03:03 PM

if you post your location we might be able to help you better :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View oldnovice's profile

oldnovice

7482 posts in 3752 days


#7 posted 11-06-2018 07:29 PM

Since I only use Forrest blades I get mine sharpened at Forrest as mentioned by John H in post #2 above.
I send the blades by USPS after following the Forrest packaging instructions, simpler than running all over the countryside .

One of my blades is getting close to 40 years old and I have had it sharpened several times, twice because of a chipped tooth, don’t let your neighbors cut things you haven’t checked beforehand even when they say they know what they are doing!

-- "I never met a board I didn't like!"

View knotscott's profile

knotscott

8288 posts in 3760 days


#8 posted 11-06-2018 10:52 PM

Scott Whiting on the west coast, Dynamic Saw on the east coast.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View AlaskaGuy's profile

AlaskaGuy

5271 posts in 2694 days


#9 posted 11-07-2018 12:46 AM

I’ve been sending to Scott Whiting for years.

-- Alaskan's for Global warming!

View 8iowa's profile

8iowa

1591 posts in 4146 days


#10 posted 11-07-2018 12:51 AM

Another excellent sharpening source is Schupert & son in Dayton Ohio.

-- "Heaven is North of the Bridge"

View DrDirt's profile

DrDirt

4555 posts in 4127 days


#11 posted 11-08-2018 03:01 AM

Happy with Forrest sharpening. For freud blades as well
Suspect there are lots of good guys

Think it is like computer chips. They eather are crapola day 2 or are well done. Not so many mediocre folks

-- “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain

View recon49's profile

recon49

16 posts in 389 days


#12 posted 11-08-2018 08:26 AM

Heard about the good works of Scott. Not surprised he’s popular here as well.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com