LumberJocks

All Replies on What finish do you use on your wooden models?

  • Advertise with us
View Jason1974's profile

What finish do you use on your wooden models?

by Jason1974
posted 11-05-2018 05:57 PM


11 replies so far

View Dutchy's profile

Dutchy

3384 posts in 2554 days


#1 posted 11-05-2018 08:16 PM

Aerosol spray lacquer

-- https://dutchypatterns.com/

View LittleBlackDuck's profile

LittleBlackDuck

2628 posts in 1206 days


#2 posted 11-05-2018 08:24 PM



Aerosol spray lacquer

- Dutchy


If you do, suggest you spray lightly or those originally moving parts may object!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View crowie's profile

crowie

3062 posts in 2336 days


#3 posted 11-05-2018 08:26 PM

G’Day Jason,
Recently I’ve started making my own Wipe On Poly to the following receipe:
30% Tung Oil
40% Clear Satin Polyurethane
30% Mineral Turps
I’ve even done a trial with a splash of teak stain for a honey colour…
Prior to that I’d used the Pressure Pack Clear Gloss or Satin Lacquer; sometimes Polyurethane..

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View WoodenDreams's profile

WoodenDreams

601 posts in 296 days


#4 posted 11-05-2018 08:26 PM

You can get Aerosol spray finishes in a variety of stains. For small objects it’s so much quicker vs brush or spray gun.

View Jason1974's profile

Jason1974

238 posts in 708 days


#5 posted 11-06-2018 12:03 AM

thanks guys, whats your take on danish oil. I see a lot of people using it.

-- Jason, Camden, NC -- MEASURE TWICE, CUT ONCE, THEN FORCE IT TO FIT.

View LittleBlackDuck's profile

LittleBlackDuck

2628 posts in 1206 days


#6 posted 11-06-2018 02:04 AM



thanks guys, whats your take on danish oil. I see a lot of people using it.

- Jason1974


Danish oil gives a darker hue than tung (depending on brands as well). Danish oil generally (again depending on brands) takes about double the time of tung to cure.

Personally I prefer brush on shellac, dries quickly and if the application area is relatively clean can minimise nibs. Dries quickly (give it a few coats in 30 minutes) and leaves a pleasant gloss after a few coats.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Jason1974's profile

Jason1974

238 posts in 708 days


#7 posted 11-06-2018 02:53 AM

Thanks Alex, I’ve been using wipe on poly and wanted to try something different for a change.

-- Jason, Camden, NC -- MEASURE TWICE, CUT ONCE, THEN FORCE IT TO FIT.

View GR8HUNTER's profile

GR8HUNTER

6065 posts in 1098 days


#8 posted 11-06-2018 03:57 AM

I like watco Danish oil for like construction vehicles
but for like say a race car I like minwax poly spray gloss :<))

watco does take long time to dry like 3 days or so

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View htl's profile

htl

4678 posts in 1545 days


#9 posted 11-06-2018 04:32 AM

Like Tony I use Danish oil and really haven’t tried anything else as it’s so easy and hides any super glue spots I may have missed sanding out.
Be careful with water based finishes as they will raise the grain and add to you sanding work but some people like that?

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View Woodchuckswife's profile

Woodchuckswife

30 posts in 1696 days


#10 posted 11-06-2018 05:46 PM

I dip mine in mineral oil. If it gets broke you can reglue ,sand and redip. never see the fix.
Chuck

View WoodenDreams's profile

WoodenDreams

601 posts in 296 days


#11 posted 11-06-2018 06:09 PM

I like the dipping in mineral oil trick.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com