LumberJocks

All Replies on Which lathe to keep?

  • Advertise with us
View petercbrockman's profile

Which lathe to keep?

by petercbrockman
posted 11-03-2018 05:30 PM


4 replies so far

View MrUnix's profile

MrUnix

7243 posts in 2497 days


#1 posted 11-03-2018 05:45 PM

I was in a similar situation… 5 lathes, not enough room, and had to thin the herd. I had the predecessor to your Delta, the 46-110, which was a similar 4 speed stepped pulley design, but with 10” swing instead of 11”. I also have the original to that harbor freight lathe, the Jet JWL1236, which is basically identical.

I just sold the Delta two weeks ago ;-)

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View OSU55's profile

OSU55

2153 posts in 2287 days


#2 posted 11-03-2018 06:06 PM

Keep the HF 34706. Here is my review of it. The reeves drive should be disassembled, inspected, and lubed and will give years of trouble free use. Some of the knobs may need tightened or replaced and I did have to replace the main spindle headstock clamp bolt after it broke but not a big deal. Have made hundreds of nice pieces with the lathe.

You will need cutting tools and a sharpening method. Recommend starting with Benjamins Best tools from PSI and a slow speed 8” bench grinder with alox wheels and a wolverine varigrind style jig. May want to look at tool rests also – easy to drill out the banjo to accept 1” tool rest bars. May want a chuck – look at psi Barracuda2 keyed not 2handled.

View Wildwood's profile

Wildwood

2570 posts in 2433 days


#3 posted 11-03-2018 07:38 PM

Disagree with other posters think that Rockwell lathe easier to operate moving belts over pulleys to change speed more reliable than reeves drive lathe. That Rockwell is easier to repair or modify.

Both lathes primarly spindle lathes althought can turn bowls on them. HF’s starting speed slower than Rockwell’s but easier to modify just by changing pulley wheels, or converting to electronic control speed. Not a big fan of Asian reeves drive lathes, but just MHO!

http://vintagemachinery.org/pubs/698/1390.pdf

Not sure what type of turning you want to do, but would keep both lathes until learn how to turn wood.

Learning spindle turning first makes bowl turning lot easier because you learn tool control with different turning tools; parting tool, skews, and gouges. Bowl turning only need bowl gouges & and maybe a scrapper or two. That comes from my personal experince turning simple spindle projects before jumping into bowl turning.

-- Bill

View petercbrockman's profile

petercbrockman

4 posts in 2367 days


#4 posted 11-04-2018 01:00 AM

Thanks to all. Most heart warming to be part of this community of knowledge, skill, and sharing.

Pete

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com