All Replies on Magnets for removable cover

  • Advertise with us
View deadherring's profile

Magnets for removable cover

by deadherring
posted 11-02-2018 02:13 PM

10 replies so far

View bilyo's profile (online now)


688 posts in 1488 days

#1 posted 11-02-2018 02:23 PM

The rare earth magnets are pretty strong and with enough of them properly placed the door should stay in place. Having said that, I think my first consideration would be to attach the door with hinges and use the magnets to hold it closed. I think that under actual use you will find this to be more convenient rather than have the door come completely off. Just my $0.02 worth.

View ocean's profile


159 posts in 1218 days

#2 posted 11-02-2018 02:28 PM

You need neodymium magnets. They come it all kinds of sizes and are up to 10 times stronger than regular magnets. Should be no problem using them. Epoxy them to surface and and small metal plate for other piece (door, box) and your good to go.

-- Bob, FL Keys

View GR8HUNTER's profile


6064 posts in 1098 days

#3 posted 11-02-2018 02:35 PM

I would just make bottom piece a little wider so door would sit on it the 2 magnets should be perfect :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View lew's profile


12762 posts in 4140 days

#4 posted 11-02-2018 02:41 PM

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Bill_Steele's profile


515 posts in 2117 days

#5 posted 11-02-2018 02:42 PM

You could easily hold that size piece of wood on with magnets. Like the others have said you want rare-earth magnets—they are the strongest.

I’ve purchased magnets from this place >

You can epoxy the magnet into a hole or recess. You can also buy magnets that have a countersunk hole cast into them—so you can put a screw through the magnet to attach it. They also sell small cups that are can be mounted and are designed to hold a magnet

View John Smith's profile

John Smith

1826 posts in 548 days

#6 posted 11-02-2018 04:13 PM

velcro is also an option



-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View ddockstader's profile


163 posts in 3647 days

#7 posted 11-02-2018 04:53 PM

I will reveal my secret magnet source – Harbor Freight. They sell a pair of magnetic hooks for usually $4.99 with a 20% discount coupon. The package says they have 65 lbs of pull. I believe it! They come back-to-back with a piece of foam in between. Be careful when you take them apart. If you get your thumb pinched between them you can get a pretty nasty blood blister. DAMHIKT. Simply drill out the hooks (1/4” drill) and attach with bolts or screws to whatever you want to hold. I’ve used them all over my shop. I have 3 of them holding a 2’ x 2’ pegboard under my cast iron table saw wing with ALL my table saw accessories hanging on it. They are strong, cheap, and reliable.

View Craftsman on the lake's profile

Craftsman on the lake

2973 posts in 3823 days

#8 posted 11-02-2018 05:12 PM

I recently purchased some magnets from Amazon for totally unrelated purpose. I constantly laughed at myself as I worked to separate each one as I used them. I finally had to use a table knife to pry them apart. Lifting them or sliding them was fruitless. They are 2” long and 3/8” wide. They come with very good 3m double sided tapes pieces cut to the magnet size. Maybe they might be what your are considering. The cost was good too. 24 for $20.

-- The smell of wood, coffee in the cup, the wife let's me do my thing, the lake is peaceful.

View oldnovice's profile


7482 posts in 3753 days

#9 posted 11-02-2018 06:17 PM

If you have questions about magnets, lew posted the link to the right company, KJ Magnetics!
If they don’t have what you want/need, it doesn’t exist.

They helped me do a magnetic tracking system for a wind driven car.

-- "I never met a board I didn't like!"

View deadherring's profile


83 posts in 2029 days

#10 posted 11-02-2018 09:08 PM

Thanks all, sounds like rare earth magnets are the way to go.

@Gr8hunter: Good idea, but I’m thinking I want a clean look and I think doing it your way will add a seam where the face is sitting on another piece of wood. Hopefully that makes sense.


Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics