LumberJocks

All Replies on Splits in oak

  • Advertise with us
View trsnider's profile

Splits in oak

by trsnider
posted 10-28-2018 08:09 PM


6 replies so far

View lumbering_on's profile

lumbering_on

578 posts in 970 days


#1 posted 10-28-2018 08:25 PM

Is it just one side, or does it go all the way through? As long as it’s only on one side, then I’ve found plenty of ways to hide flaws, errs, and just plain ugly wood. Usually, it involves a wall, door, or something else that just makes it impossible to see without actually looking for it. If all else fails, just ignore it. You’d be surprised how ‘blind’ you go after a while.

View Jeff's profile

Jeff

507 posts in 3675 days


#2 posted 10-28-2018 08:31 PM

I’ve used wood that had cracks like you’ve seen and even some obvious knots. It adds character. I’m a human wood worker not a machine. I expect I’ll have imperfections.

View bondogaposis's profile

bondogaposis

5518 posts in 2831 days


#3 posted 10-28-2018 10:46 PM

If they are not on both sides, then turn the splits to the inside of the cabinet. You could fill them too with a little hide glue and sawdust.

-- Bondo Gaposis

View Tony_S's profile

Tony_S

997 posts in 3563 days


#4 posted 10-28-2018 10:47 PM

Repair, then repair some more, the wood moves and checks that weren’t there before appear…repair some more.
That kind of stuff is notorious for popping up on quarter sawn edges and faces with humidity changes.

I’d have a fire….but thats just me.

-- It is the mark of an educated mind to be able to entertain a thought without accepting it. Aristotle

View trsnider's profile

trsnider

148 posts in 2490 days


#5 posted 10-29-2018 12:46 AM

I’ll surface some of it and see how deep the splits are. If they end up in the middle and aren’t deep I’ll fill them in.
As for the cupped piece I’ll rip it and see how much is left after squaring it up. I’m thinking both pieces might end up as end grain cutting boards or maybe firewood.
“Never buy lumber just because the price is good” there’s probably a reason for that.
Thanks to all.

View WDHLT15's profile

WDHLT15

1819 posts in 2956 days


#6 posted 11-06-2018 12:39 PM

That oak was dried too fast.

-- Danny Located in Perry, GA. Forester. Wood-Mizer LT40HD35 Sawmill. Nyle L53 Dehumidification Kiln. hamsleyhardwood.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com