LumberJocks

All Replies on Bench dogs

  • Advertise with us
View GANGGREEN's profile

Bench dogs

by GANGGREEN
posted 10-28-2018 11:53 AM


10 replies so far

View Fred Hargis's profile

Fred Hargis

5809 posts in 3036 days


#1 posted 10-28-2018 12:15 PM

I have the ones from Lee Valley, and they are quite good. With these, you drill 3/4” holes, the dogs are sized to fit perfectly. My top is 2 7/8” and I bought the longer version of the dogs. The holes are through drilled, that way I can leave the dogs on place by pushing them down flush with the surface, if I need them I reach under the bench and push them up for access.

-- Our village hasn't lost it's idiot, he was elected to congress.

View GANGGREEN's profile

GANGGREEN

33 posts in 1023 days


#2 posted 10-28-2018 12:18 PM



I have the ones from Lee Valley, and they are quite good. With these, you drill 3/4” holes, the dogs are sized to fit perfectly. My top is 2 7/8” and I bought the longer version of the dogs. The holes are through drilled, that way I can leave the dogs on place by pushing them down flush with the surface, if I need them I reach under the bench and push them up for access.

- Fred Hargis

Thanks, much appreciated.

View bondogaposis's profile

bondogaposis

5561 posts in 2894 days


#3 posted 10-28-2018 01:04 PM

I can’t remember where I got my bench dogs, I know there are several sources. The standard size is 3/4”. Don’t forget to add hold fasts, they are super useful. The holes should go all of the way through the top, otherwise they will plug up with saw sawdust. It is also nice to be able to push the dogs flush with the top when you don’t need them.

-- Bondo Gaposis

View GANGGREEN's profile

GANGGREEN

33 posts in 1023 days


#4 posted 10-28-2018 01:28 PM



I can t remember where I got my bench dogs, I know there are several sources. The standard size is 3/4”. Don t forget to add hold fasts, they are super useful. The holes should go all of the way through the top, otherwise they will plug up with saw sawdust. It is also nice to be able to push the dogs flush with the top when you don t need them.

- bondogaposis

Yep, I had planned to get at least one holdfast as well. Might see if I can get a friend to make me some in his blacksmith shop.

View Ocelot's profile

Ocelot

2365 posts in 3181 days


#5 posted 10-29-2018 03:15 AM

Toolsforworkingwood.com Gramercy holdfasts are recommendable

View CaptainKlutz's profile (online now)

CaptainKlutz

1955 posts in 2037 days


#6 posted 10-29-2018 07:05 AM

There are several LJ existing threads on bench dog types, and how to make.
Google , or your favorite search tool will also provide a ton of information on bench dogs.

3/4 inch is most common US size, Festool/EU common size is 20mm; but you can made them what ever size you want. I prefer to make my 3/4 bench dogs from tight grained maple 3/4 inch square stock and use 3/8 inch radius round over bit to make bottom 90% of shaft round. Provides square edge for clamping against and stops the dog from dropping thru hole. Cost almost nothing to make from scrap.

Cheers!

-- I'm an engineer not a woodworker, but I can randomly find useful tools and furniture inside a pile of lumber!

View WoodenDreams's profile

WoodenDreams

806 posts in 453 days


#7 posted 10-29-2018 07:26 AM

I would use 3/4” holes, drill the holes through. Drill them, do not use a plunge router to do the holes. A through hole allows you to use Bench Dogs, and Bench Dog Clamps or hold fasts. You can make your own with wood dowels. Menards, Kreg and Rockler has Bench Dogs for $7.99. Check out “Bing Images Bench Dogs” to see a variety of styles. Irwin has bench dog adapters that allow you to use Irwin clamps in the bench dog holes.

View Bill Berklich's profile

Bill Berklich

962 posts in 931 days


#8 posted 10-29-2018 12:52 PM



Toolsforworkingwood.com Gramercy holdfasts are recommendable

- Ocelot

Don’t go cheap on these. I bought a cast one from Taiwan and it’s useless. Gramercy’s are really effective.

-- Bill - Rochester MI

View HokieKen's profile

HokieKen

11422 posts in 1681 days


#9 posted 10-29-2018 01:30 PM

+2 for Grammercy

-- Kenny, SW VA, Go Hokies!!!

View waho6o9's profile

waho6o9

8787 posts in 3119 days


#10 posted 10-29-2018 01:35 PM

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com