LumberJocks

All Replies on 1/8" veneer on 1/4" MDF strips?

  • Advertise with us
View harum's profile

1/8" veneer on 1/4" MDF strips?

by harum
posted 10-27-2018 11:54 PM


6 replies so far

View shipwright's profile (online now)

shipwright

8306 posts in 3194 days


#1 posted 10-28-2018 02:54 AM

Thinner veneer would be better. 1/16” would be fine. 1/8” might be but you’re pushing it IMHO. I used to like MDF for veneered boxes but now much prefer B.B. plywood. .... just my opinion.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/

View harum's profile

harum

364 posts in 2039 days


#2 posted 10-28-2018 03:35 AM

Thanks, Shipwright! Will try to sand some veneer off to make it thinner. Do you mean that even a 1-1/2” wide strip veneered onto MDF may crack/warp eventually?

-- "If you're not counting the ripples when throwing pebbles in the water, you're wasting your time."

View JADobson's profile

JADobson

1442 posts in 2507 days


#3 posted 10-28-2018 04:03 AM

Paul – For someone who has a veneering project coming up and who hasn’t yet decided between an mdf and a plywood substrate would you be willing to expound on your preference for ply?

-- No craft is very far from the line beyond which is magic. -- Lord Dunsany — Instagram @grailwoodworks

View shipwright's profile (online now)

shipwright

8306 posts in 3194 days


#4 posted 10-28-2018 02:54 PM

harum, The glue can control the bottom of the veneer but the thicker it gets, the less control it has over the top. I know 1/16 will be fine. Maybe 1/8 will be too but more risk.

JAD, I use hide glue. One of the reasons is that it is reversible with heat and water. If you need to do that on an MDF base, the base will start to soften and turn to mush. Otherwise I don’t have a problem with it but that’s a big one for me.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/

View MrRon's profile

MrRon

5501 posts in 3639 days


#5 posted 10-28-2018 04:13 PM

Baltic birch is the prefered material when veneers are to be applied. I agree with the others that 1/16” thick veneer is better than 1/8”. Why do professionals use MDF? because the material is cheap

View JADobson's profile

JADobson

1442 posts in 2507 days


#6 posted 11-02-2018 02:38 PM

Thanks for the reply Paul – I’d forgotten about this thread. I’m planning on using hide glue so that is good to know. Thanks.

-- No craft is very far from the line beyond which is magic. -- Lord Dunsany — Instagram @grailwoodworks

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com