LumberJocks

All Replies on Need some help with finding the right tool

  • Advertise with us
View natanchen's profile

Need some help with finding the right tool

by natanchen
posted 10-26-2018 04:42 PM


9 replies so far

View Phil32's profile

Phil32

461 posts in 201 days


#1 posted 10-26-2018 05:35 PM

A sketch of your proposed coffee table would help readers give suggestions. Draw it on paper & take a photo with a camera or cell phone.
If the log is 100 lbs, you will probably need to hollow it with some portable tool like a chain saw.

-- Phil Allin - There are mountain climbers and people who talk about climbing mountains. The climbers have "selfies" at the summit!

View Andybb's profile

Andybb

1797 posts in 901 days


#2 posted 10-26-2018 05:49 PM

Welcome to lj! Yes. A picture of the log and a sketch of your idea would help. I think you need to make a certain number of posts to be able to post pictures. If you PM me with pics I’ll post them for you. Not really sure what you mean about hollowing out with a lathe.

-- Andy - Seattle USA

View HokieKen's profile (online now)

HokieKen

8632 posts in 1436 days


#3 posted 10-26-2018 06:41 PM

Angle grinder and chainsaw come to mind immediately. As others said, a sketch would help.

-- Kenny, SW VA, Go Hokies!!!

View natanchen's profile

natanchen

3 posts in 145 days


#4 posted 10-27-2018 01:15 AM

Thank you all for the response. so in this image i have started with a hand saw which is a pain but i want to cut half of the upper portion to set magazines or books. and at least a foot and a half hollowed in from the bottom also a secret storage if anything lighten up the load if need to move around thanks again

View Andybb's profile

Andybb

1797 posts in 901 days


#5 posted 10-27-2018 01:42 AM

If you’re using an iPhone turn your phone horizontal and the pic will orient correctly.

-- Andy - Seattle USA

View DrDirt's profile

DrDirt

4529 posts in 4040 days


#6 posted 10-27-2018 02:36 AM

Chainsaw would do the quartering simply, and you can plunge cut with it.

Angle grinder for shaping and finer details

-- “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain

View runswithscissors's profile

runswithscissors

2987 posts in 2323 days


#7 posted 10-27-2018 03:33 AM

Be very careful plunging with a chainsaw. Kickback can be dangerous.

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View lumbering_on's profile

lumbering_on

578 posts in 788 days


#8 posted 10-27-2018 03:54 AM

If you don’t want to use chainsaw, you can drill adjacent holes with an auger bit. I’ve also heard you can burn the center out of it, although I have no experience with it, it sure sounds easier.

View natanchen's profile

natanchen

3 posts in 145 days


#9 posted 10-29-2018 08:57 PM

Thank you all for the information try and get a result in when I get the chance. Thanks again

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com