All Replies on Anyone have experience with DuraPro Woodworkers Glue?

  • Advertise with us
View Jimothy's profile

Anyone have experience with DuraPro Woodworkers Glue?

by Jimothy
posted 10-24-2018 01:44 AM

5 replies so far

View lumbering_on's profile


578 posts in 1347 days

#1 posted 10-24-2018 02:18 AM

I have a rule when I buy glue to ensure it’s the good stuff – I make sure it says glue on the bottle.

Other than when you need something that is water resistant or even water proof, it’s not going to make much difference. I’ve use Titebond, Elmer’s, Lepage, and now I use whatever is cheapest at Canadian Tire. It’s all performed the same.

View Jimothy's profile


57 posts in 1797 days

#2 posted 10-24-2018 02:32 AM

You havent tried this brand though?

View lumbering_on's profile


578 posts in 1347 days

#3 posted 10-24-2018 03:15 AM

No, but it’s rated for 4000 lbs and that’s better than Lepage, although I would doubt you’d need the extra strength for anything. I never heard of Armor Coat before I bought it at Canadian Tire, and no issues with it for the past two years. The truth is even school glue will hold wood well enough.

View Tony_S's profile


1352 posts in 3940 days

#4 posted 10-24-2018 09:50 AM

Been using it in the shop for about….8 years now? Averaged out over the years I think I’ve bought somewhere in the neighborhood of 10 thousand gallons? No…that’s not a typo.
Interestingly enough, like you, I used to buy Lepage, but they stopped selling wholesale in 45 gallon drums so we switched to Durapro AW-2300.
The properties are very similar to the yellow Lepage product as far as open and set time, rigidity of bent Lams etc. I doubt you’ll notice a whole lot of difference, if any. ‘Spring back’ on bent lams after 24 hrs was nearly identical(next to nil).

Much of what lumbering_on says is true as far as straight lamination’s goes. White glue works fine. The only real difference with most is a longer open time as white usually has less solids. Because of that though, you’ll get more spring back on bent lamination’s with white glue.

Don’t fall into the common mentality here that Titebond is the bestest ever! In most common woodworking situations that’s horseshit. All common PVA’s have different properties as far as viscosities, open and set time, but at the end of the day, for all basic face/edge laminations…your sticks will be stuck…regardless of the brand or color of PVA.

-- “Wise men speak because they have something to say; fools because they have to say something.” – Plato

View WoodenDreams's profile (online now)


1128 posts in 768 days

#5 posted 10-24-2018 06:37 PM

I buy my Titebond glue in one gallon jugs. Wood Stock Supply has available Titebond in 5 gallon and 55 gallon drums, and will ship direct.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics