LumberJocks

All Replies on Air filtration yes or no?

  • Advertise with us
View ChefHDAN's profile

Air filtration yes or no?

by ChefHDAN
posted 10-19-2018 06:51 PM


18 replies so far

View lumbering_on's profile

lumbering_on

578 posts in 974 days


#1 posted 10-19-2018 07:40 PM

View ChefHDAN's profile

ChefHDAN

1443 posts in 3333 days


#2 posted 10-19-2018 07:43 PM

Yes different brand but same type of filtration

-- I've decided 1 mistake is really 2 opportunities to learn.. learn how to fix it... and learn how to not repeat it

View Ripper70's profile

Ripper70

1316 posts in 1392 days


#3 posted 10-19-2018 07:48 PM

I have the ShopFox version of that air filter. Works great and the filters can be cleaned and reused many times. I think I paid about $160 bucks or so from Amazon. For $100 dollars, BNIB, I’d jump on it.

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View lumbering_on's profile

lumbering_on

578 posts in 974 days


#4 posted 10-19-2018 07:56 PM

As long as it’s in good condition, it sounds like a good deal. Otherwise, you could build your own, which is what I plan on doing. All you need to do is build a box, and use one of these with some furnace filters

https://www.princessauto.com/en/detail/550-cfm-air-mover/A-p8663916e

View taterjoes's profile

taterjoes

37 posts in 1279 days


#5 posted 10-19-2018 08:02 PM



I have the ShopFox version of that air filter. Works great and the filters can be cleaned and reused many times. I think I paid about $160 bucks or so from Amazon. For $100 dollars, BNIB, I d jump on it.

- Ripper70

I have a Grizzly version, and it does a good job. I am a scrollsaw guy and those saws make very fine dust. I use the timer on it all the time, especially when I am done for the day.I also have a furnace filter cable-tied to a cheap 20” box fan and it does an amazing job, too. BTW, Amazon sells Wen filters that fit most of those hanging boxes for a lot less than anywhere else I’ve seen.

-- It’s all good!

View Rick  Dennington's profile

Rick Dennington

6633 posts in 3678 days


#6 posted 10-19-2018 08:07 PM

I’ve had an air cleaner in my shop from the time I built it…It’s a JDS-750…..750 cfms…..It scrubs the air while running machines, plus I use it to scrub the air before I apply a finish….Takes all of the fine dust impurities out of the air…..3 speed, remote control…..

-- " The secret to staying young looking.....hang around old people.." R.D.

View firefighterontheside's profile

firefighterontheside

20522 posts in 2340 days


#7 posted 10-19-2018 08:07 PM

I bought a brand new Wen unit that can be had on amazon for $126. Remote control. I definitely recommend having one for the times that it gets really dusty. As an added bonus, it helps circulate air in the shop. I think that helps in the winter when the heat rises to the top of my 12 foot ceiling.

-- Bill M. "People change, walnut doesn't" by Gene.

View GR8HUNTER's profile

GR8HUNTER

6384 posts in 1196 days


#8 posted 10-19-2018 08:20 PM

why …. is this not in your shop right now YES :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Jim Finn's profile

Jim Finn

2737 posts in 3406 days


#9 posted 10-19-2018 08:49 PM

I have a ceiling mounted air filter, from grizzly, and it cleans the entire air volume of my 13’x23’ shop in five minutes. Yes I recommend them.

-- No PHD just a DD214

View msinc's profile

msinc

567 posts in 987 days


#10 posted 10-20-2018 01:11 AM

I would buy it. That said, I don’t have one. I wear a dust mask or respirator in my shop. I figure if there is dust in the air for the box filter to remove {don’t get me wrong, removing it is a good thing} then there has to also be dust in the air for me to breathe. The reason I don’t have one is that for dust removal I wait for a windy day, open both big sliding doors and start blowing compressed air all around the shop stirring up the dust. Doesn’t really take long if it’s good and windy to get just about all the dust blown away and gone. If your shop is closed up it is better to run a dust box filter than an air compressor.

View Rick  Dennington's profile

Rick Dennington

6633 posts in 3678 days


#11 posted 10-20-2018 01:45 AM

This is the JDS-750 I have hanging in my shop…It hangs in the center of the shop, which is 40’ x 50’....I mounted it right over the table saws…....

-- " The secret to staying young looking.....hang around old people.." R.D.

View WoodenDreams's profile

WoodenDreams

709 posts in 394 days


#12 posted 10-20-2018 01:54 AM

I bought a Wen for $109. from Home Depot through ebay. I also made a couple air filtration units using vent fans and furnace filters.

View ChefHDAN's profile

ChefHDAN

1443 posts in 3333 days


#13 posted 10-23-2018 06:48 PM

Well, I wasn’t sure if it made sense to have it in a garage where I mostly work with the door open, but you all made several good points which generally lead me back to the adage, buy a filter or be a filter. SO here it is, its from when HD got rid of all of the gray tools about 12 or 15 years ago. Came from a shop of a woodworker with decades of experience that recently passed in his 80’s, he had a delta and I guess he picked this up a s a spare and never needed it. Cost me $120 and about an hour and a half of driving through a pretty nice part of Maryland. Staring at the ceiling and the door opener it just seemed easier to use some angle iron I already had for the mount. Okay, tried 3 different ways, just went over to Win10 and NOT liking the photo software…

-- I've decided 1 mistake is really 2 opportunities to learn.. learn how to fix it... and learn how to not repeat it

View lumbering_on's profile

lumbering_on

578 posts in 974 days


#14 posted 10-23-2018 08:07 PM

Nice score.

View jimintx's profile

jimintx

921 posts in 2068 days


#15 posted 10-23-2018 08:33 PM

Nice.

I have a different brand of the same thing. Mine too is having center shop, above the table saw area.

I also find that just running the thing makes a decent air flow in my shop, so it has some benefits in dispersing odors and causing a little breeze, too.

-- Jim, Houston, TX

View bigJohninvegas's profile

bigJohninvegas

664 posts in 1945 days


#16 posted 10-23-2018 11:43 PM

you did good. And even with the door open, when I am sanding or using a router it is on.
I just picked up this Jet, used but in new condition for $200. Sells for $400 new,

and am selling this homemade filter for $100

-- John

View Ripper70's profile

Ripper70

1316 posts in 1392 days


#17 posted 10-25-2018 01:28 AM

Ya done good, Dan. You’ll be glad you made the purchase.

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View WoodenDreams's profile

WoodenDreams

709 posts in 394 days


#18 posted 10-25-2018 04:53 AM

Your health and lungs will appreciate the purchase. If you want to put the unit to a test, Sand aromatic red cedar for a few hours, and you’ll see where the red wading dust ends up. If you mounted it in the center of the room, you may not get full air circulation through out the work area, compared to one side or end of the room. When your sanding, at first you’ll want to see where the wading dust ends up on shelves or equipment. If you still have wading dust issues, just change the area or direction of the unit. Nice purchase.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com