LumberJocks

All Replies on Staining Question

  • Advertise with us
View Joe's profile

Staining Question

by Joe
posted 10-18-2018 06:50 PM


7 replies so far

View LittleShaver's profile

LittleShaver

597 posts in 1159 days


#1 posted 10-18-2018 09:38 PM

I done see that you need to stain at all. The wood already has the colors your wife wants. Use some scraps and try your favorite clear coat to get finishing approval. Personally, I would hit it with a coat of BLO, wait a week or two, then go over it with a couple of coats of shellac. Shellac is great for working surfaces. Easy to repair, easy to remove glue drips, and I like the way amber shellac looks.

Do some test pieces. Staining before you’re completely done shaping the pieces is doomed to failure. At least it would be for me. I don’t see that I could ever get the newly exposed wood to match the previously stained portions without blemishes of one sort or another.

-- Sawdust Maker

View lumbering_on's profile

lumbering_on

578 posts in 1030 days


#2 posted 10-18-2018 11:28 PM

Agree with the not staining, as you’re already using the wood you need. Although, be sure to test the cherry with scrap if you’re using BLO as cherry tends to absorb oil in a way that can make the finish look blotchy. Shellac is a great finish, just make sure you don’t put drinks on it.

View 000's profile

000

2859 posts in 1439 days


#3 posted 10-18-2018 11:42 PM

Just build the table and stain everything with the golden oak.
The light color won’t have much affect on the cherry, you will still have the contrast your looking for.
Make a sample.

View Joe's profile

Joe

23 posts in 3231 days


#4 posted 10-18-2018 11:54 PM

Thank you for the responses. Can you define BLO?

-- Joe

View Joe's profile

Joe

23 posts in 3231 days


#5 posted 10-18-2018 11:55 PM

Ahhhhh! Boiled Linseed Oil

-- Joe

View SMP's profile

SMP

1426 posts in 445 days


#6 posted 10-18-2018 11:59 PM

What about leaving the cherry in the sun a couple weeks before assembly and finish?

Check here to see a single piece cut and applied various finishes and put in sun for 2 weeks vs some not in sun.
http://www.woodweb.com/knowledge_base/Darkening_Cherry_to_Match_Existing.html

View Joe's profile

Joe

23 posts in 3231 days


#7 posted 10-20-2018 11:25 AM

I appreciate all the comments. This is a rush job that has to be wrapped up ASAP so no time to allow for the sun to do its’ trick. I think I’m going to do the glue up, finish all the shaping and sanding and give it a coat of a fairly light stain and finish. The room is quite bright so the sun will darken the cherry quick enough. Thanks guys.

-- Joe

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com