All Replies on Trying to restore Singer 66-18 sewing machine

  • Advertise with us
View livewire516's profile

Trying to restore Singer 66-18 sewing machine

by livewire516
posted 10-15-2018 05:04 PM

8 replies so far

View therealSteveN's profile


6490 posts in 1462 days

#1 posted 10-16-2018 12:04 AM

I’ve bought and sold a bunch of them to people looking for a piece of history??? Never did look into working on them because if you pumped the treadle, all of them sewed real nice. Really simple works, play with it a bit and you will see pretty much all there is.

Any knobs and gizmo’s just do adjustments on thread play, stitch length, and possibly a zig zag, back then you were limited to stitch.

-- Think safe, be safe

View MrUnix's profile


8244 posts in 3087 days

#2 posted 10-16-2018 12:31 AM

That looks to be in fantastic shape, so hopefully all that is needed is a good clean/lube/adjust. Does the motor run? I’ve rebuilt a couple of sewing machines, although all were much newer than that one. There really is not a lot to them, and even less on those older ones, so you should be able to figure it out easily. Remember to take lots of photos if you do any disassembly.


-- Brad in FL - In Dog I trust... everything else is questionable

View livewire516's profile


110 posts in 748 days

#3 posted 10-18-2018 02:00 AM

Thanks, both of your input are reassuring. Amazingly, the motor runs fine! I don’t know the underlying circuitry for its pedal/speed control, but even that works as good as I could have imagined.

I will start with a thorough cleaning/lube as directed by a copy of the Singer 66 manual I downloaded

View AlaskaGuy's profile


6131 posts in 3197 days

#4 posted 10-18-2018 07:03 AM

As Brad suggest “hopefully all that is needed is a good clean/lube/adjust”. Once that is done try sewing 2 pieces of Alder veneer together. If successful you should be good to go.

-- Alaskan's for Global warming!

View GR8HUNTER's profile


7937 posts in 1600 days

#5 posted 10-18-2018 01:56 PM

this question is best suited for sawingjocks NOT lumberjocks :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View Bill White's profile

Bill White

5310 posts in 4848 days

#6 posted 10-18-2018 02:04 PM

Not related to the mechanics, but I cleaned (exterior) an old treadle Singer with GoJo. Did not harm the decals, and sure did make the machine look like new.

-- [email protected]

View livewire516's profile


110 posts in 748 days

#7 posted 10-18-2018 10:23 PM

Tony – haha I’m sure you mean Sewing Jocks. They’ll surely send me back when they realize I’m mostly just interested in upholstering Roorkee and Tripolina-style chairs. Also, I grew up in Bucks, not too far from you, relatively.

Bill – Thanks, I hadn’t considered the exterior yet but I had been concerned about maintaining the integrity of the decals through all of this. That’s reassuring.

View jeffdeluca's profile


8 posts in 743 days

#8 posted 10-18-2018 11:17 PM

Congrats on your find! I also just picked up a 1948 Singer 15-91 from a nice older lady – this belonged to her grandmother! It was locked up as the lube all dried out. I used Zoom Lily White oil and just doused all the moving parts and little by little freed it up. After much research on the Tube… would have used some kerosene first to loosen it up… let it dry out then lube it up. I’m in the research mode for the proper lube to use in the grease pots where the wicks reside.
Then I found a 1951 Singer 301. Again beautiful condition.
not sure why…. I have this all-of-a-sudden interest!

Here’s is a great resource I use…

-- Jeff DeLuca

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics