LumberJocks

All Replies on wiring

  • Advertise with us
View Karda's profile

wiring

by Karda
posted 10-15-2018 04:21 PM


7 replies so far

View squazo's profile

squazo

124 posts in 2030 days


#1 posted 10-15-2018 04:49 PM

you could check it with a volt meter.

But you should kill the breaker anyways, Ive got a friend who got hit with 20 thousand volts and almost died.

120 can kill you too.

The switch could fail

Somebody could turn it on.

a bug could get in there and connect the contacts (this has happened and I have had to deal with the resultant fire)

It could have a secondary means of power

Just too many ways to get hurt.

View JohnMcClure's profile

JohnMcClure

621 posts in 1025 days


#2 posted 10-15-2018 05:20 PM

Agreed. Kill power at a breaker, then check for dead with a meter. If you cant do that, get a pro.

-- I'd rather be a hammer than a nail

View William Shelley's profile

William Shelley

609 posts in 1854 days


#3 posted 10-15-2018 09:56 PM

I’m super paranoid, I always test my volt meter against a known live circuit before confirming that another circuit is dead. I wouldn’t want to end up on the floor because of a malfunction in a $15 tool.

That being said, electricity is dangerous but if you know the rules and pay attention, you shouldn’t have any accidents. I’ve done work in my main panel live before because I didn’t want to turn off the computer servers I run.

-- Woodworking from an engineer's perspective

View verdesardog's profile

verdesardog

171 posts in 2996 days


#4 posted 10-15-2018 10:50 PM

Trance former, that’s a new one on me. New age electronics?? LOL

Most likely transformer I guess. what is it conncted to that has a switch? You never know if the installer was qualified to do the wiring, I would check for voltage before doing anything with it.

-- .. heyoka ..

View Karda's profile

Karda

1514 posts in 939 days


#5 posted 10-15-2018 10:56 PM

ok thanks I can turn it off

View lumbering_on's profile

lumbering_on

578 posts in 875 days


#6 posted 10-15-2018 11:26 PM

Standing on a plastic stool with rubber soled work boots and keeping one hand behind your back will prevent any issues. But a voltage meter usually suffices.

View lumbering_on's profile

lumbering_on

578 posts in 875 days


#7 posted 10-15-2018 11:26 PM

Double post

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com